Updated November 2026
Looking for the right kohler bathtub faucet parts? Most tub repairs come down to one component: a worn cartridge, a tired hot-side valve or a diverter that no longer sends water to the spout. This list focuses on genuine Kohler replacement parts sold on Amazon US, selected by how well each part matches a common repair, how clearly the listing identifies the part and what owners typically report about fit and performance. Before ordering, confirm your faucet model and valve type.
Our top picks at a glance
- 1
TOP CHOICEBest overallKOHLER Rite-Temp Pressure Balance Cartridge, Genuine Part GP800881View on Amazon - 2
Best for hot-side valve replacementKOHLER GP77005-RP Ceramic Valve (Hot)View on Amazon - 3
Best for general repair suppliesKOHLER Genuine Part Plumbing Fixture Repair SuppliesView on Amazon - 4
Best for diverter-related issuesKOHLER GP85555-CP Diverter Bath SpoutView on Amazon
Our Top Picks
| Product | Best for | Key feature |
|---|---|---|
| KOHLER Rite-Temp Pressure Balance Cartridge | Leaks and temperature swings | One-piece cartridge design |
| KOHLER GP77005-RP Ceramic Valve (Hot) | Hot-side valve replacement | Ceramic disc valve |
| KOHLER Genuine Part Plumbing Fixture Repair Supplies | General repair kits | Assorted genuine components |
| KOHLER GP85555-CP Diverter Bath Spout | Diverter problems | 1/2″ NPT connection |
KOHLER Rite-Temp Pressure Balance Cartridge, Genuine Part GP800881
KOHLER Rite-Temp Pressure Balance Cartridge, Genuine Part GP800881, One-Piece Design Simplifies Installation and Maintenance
Best for: Leaks and temperature swings
This is a strong fit for owners whose tub drips or whose water temperature suddenly shifts during a shower. Manufacturers describe it as a one-piece design, which simplifies installation and future maintenance.
Pros
- One-piece design simplifies installation
- Genuine Kohler part for a precise fit
Cons
- Must match your specific Kohler valve type
KOHLER GP77005-RP Ceramic Valve (Hot)
Best for: Hot-side valve replacement
Suited to owners who have isolated a leak or stiffness to the hot-side valve. Owners often report it as a direct replacement when the old ceramic valve has worn.
Pros
- Targets the hot-side valve specifically
- Ceramic design for smooth operation
Cons
- Only useful if the hot side is the confirmed source
KOHLER Genuine Part Plumbing Fixture Repair Supplies
Best for: General repair supplies
A good choice when you are not yet sure which component has failed and want a set of genuine Kohler parts on hand. It fits homeowners comfortable sorting through components.
Pros
- Genuine Kohler components in one purchase
- Useful for multiple fixture repairs
Cons
- Contents can be less targeted than a single part
KOHLER GP85555-CP Diverter Bath Spout
Best for: Diverter-related issues
Intended for tubs where water keeps flowing from the spout when the shower should be active, or where the diverter no longer shifts cleanly. Check that the 1/2″ NPT connection matches your existing spout.
Pros
- Standard 1/2″ NPT connection
- Addresses diverter-specific failures
Cons
- Replaces the spout, which is more work than a cartridge swap
Buying Guide
Identify your valve type
Kohler tub faucets use different valve families, and a cartridge built for one will not seat in another. Note the model number stamped on the valve body or listed in your installation manual before ordering.
Diagnose the failure first
A drip from the spout usually points to a cartridge or valve, while water leaking from the spout after you switch to the shower points to the diverter. Matching the part to the symptom saves a second trip to the store.
Choose genuine parts
Genuine Kohler components are built to the original tolerances, which matters for pressure-balance cartridges that must regulate hot and cold water precisely. Generic substitutes may fit but can change how the faucet responds.
Plan for the spout connection
Check thread size, usually 1/2″ NPT for many spouts, before you buy. A mismatch means the new part will not seal.
Good picks for this: KOHLER Rite-Temp Pressure Balance Cartridge and KOHLER GP77005-RP Ceramic Valve (Hot)
FAQ
Do I need to turn off the water before replacing a Kohler bathtub faucet part?
Yes. Shut off the supply valves to the tub or the main water supply, then open the faucet briefly to release residual pressure before removing any component.
How do I know which Kohler cartridge I need?
Check the model number on the faucet handle or valve body and compare it with the part listing. A cartridge that matches your valve family is the only safe choice.
When should I call a professional?
If the valve is corroded, the pipes are damaged or you are unsure how to isolate the water supply, consult a licensed plumber rather than forcing a part into place.
Conclusion
For most leaks and temperature problems, a pressure-balance cartridge is the best starting point. Choose the hot-side valve when testing points to that side, and reach for the diverter spout when water keeps flowing from the spout in shower mode. Use the repair supplies kit when you want genuine spare components on hand.
Sources
- Water efficiency and fixture leak guidance for household plumbing (epa.gov)
- Plumbing code and fixture performance standards
Related reading
- Kohler Bathtub Faucet Parts Diagram: How to Find and Use Yours
- Kohler Single-handle Bathtub Faucet: Install and Fix It Step by Step
- Kohler Kitchen Faucet Parts: How to Identify and Replace the Right Ones
- Kohler Faucet Parts Replacement Catalog: How to Find the Right Part (2026)
- Kohler Faucet Parts Diagram: How to Find and Use Yours
- Kohler Bath Faucet Parts: Identify and Replace the Right Ones
