Updated November 2026
A kohler faucet parts diagram shows every component of your faucet in an exploded view, with each part numbered so you can match it to a replacement. To use one, you need your exact model number, a clear idea of which part failed, and a few minutes to compare the drawing against the faucet in front of you. This guide walks through finding the right diagram and reading it correctly.
Find Your Model Number First
Kohler diagrams are organized by model, not by faucet family, so a similar-looking faucet can have a different parts list. Look for the model number in a few common places:
Shopping for one? See our guide: 6 Best Kohler Bath Faucet Repair Kits and Parts Compared (2026).
- The installation guide or care sheet that came in the box
- A label or stamp on the underside of the spout or under the sink near the supply lines
- The product page where you originally bought the faucet
Write the number down exactly, including any letter suffixes. A model that differs by one character can use a different cartridge or spout.
How to Read the Diagram
Most Kohler diagrams are exploded views, meaning parts are drawn separated along a line so you can see how they stack. Each part carries a reference number, and the accompanying list gives the part name and the catalog number you will order. Work through the drawing in this order:
- Locate the assembly that matches your problem: spout, handle, cartridge, aerator, or base.
- Find the numbered callouts for that section and note which ones are O-rings, seals, or springs. These small parts fail most often.
- Check the parts list beside the drawing for the kit or single-part number. Some numbers cover a full kit, while others refer to one piece.
- Compare the drawing to your faucet physically. Confirm the handle style, cartridge shape, and spout reach match before you order.
Match the Diagram to Your Faucet
Once you have the right diagram, compare it against the parts you removed. Lay the old components out in the same order as the drawing. This catches mistakes early, especially with cartridges and O-rings, which can look nearly identical but differ in diameter or height.
| Symptom | Likely diagram section |
|---|---|
| Dripping from the spout when off | Cartridge or valve seat |
| Leak at the base of the handle | O-rings and seals |
| Weak or uneven flow | Aerator and spray hose |
| Stiff or loose handle | Handle screw, cap and cartridge |
Common Mistakes When Using a Diagram
- Ordering by faucet name alone instead of the exact model number
- Replacing the whole cartridge when only an O-ring has failed
- Skipping the shutoff valves and leaving water under pressure during disassembly
- Forgetting to take photos before removing parts, which makes reassembly harder
- Assuming an older diagram still applies after a product line update
Recommended gear
A basic plumbing toolset helps you pull parts without stripping screws, and a small tray keeps tiny seals and springs from rolling away.
- Plumber’s silicone grease: keeps O-rings seating smoothly and extends seal life. View on Amazon
- Adjustable wrench set: loosens nuts on supply lines and mounting hardware without marring finishes. View on Amazon
- Magnetic parts tray: holds screws and small components in the order you removed them. View on Amazon
FAQ
Where can I find a Kohler faucet parts diagram for an older model?
Kohler’s website lists diagrams by model number, and older models may appear under discontinued or archived product pages. If you cannot locate one, a plumbing supply counter can often look up the drawing from your model number.
Do I need the diagram to replace a cartridge?
It helps, because cartridges vary by model and an incorrect one will not seat or seal properly. Matching the cartridge number on the diagram prevents an extra trip to the store.
Is it safe to take a faucet apart myself?
Most homeowners can handle basic repairs after shutting off the water supply and relieving pressure. For gas lines, main water issues, or anything you are unsure about, consult a licensed plumber.
Conclusion
A kohler faucet parts diagram is only as useful as the model number you match it to, so start there. Use the exploded view to identify the failed section, then confirm each part against your faucet before ordering. Careful matching saves time and avoids buying parts you do not need.
Related reading
- Kohler Kitchen Faucet Parts: How to Identify and Replace the Right Ones
- Kohler Bath Faucet Parts: Identify and Replace the Right Ones
- Kohler A112 18.1 Faucet Parts: How to Identify and Replace Them
- Moen Kitchen Faucet Parts Diagram: How to Find and Use Yours
- Kohler vs Moen Faucet: Which Fits Your Kitchen Better? (2026)
- Kohler Tub Faucet With Diverter: Step-by-Step Repair and Replacement Guide
