Updated November 2026
An old Delta faucet parts catalog lets you see every component of your faucet, labeled and numbered, so you can order the exact part that failed. Finding the right catalog comes down to identifying your faucet’s model and series, then searching for a matching exploded-view diagram. Once you have that, you can match the part number to a replacement and avoid buying the wrong piece.
Step 1: Identify Your Faucet Model and Series
Delta catalogs are organized by model, not by faucet style, so the first job is pinning down exactly what you have. Look for the model number stamped on the faucet body, under the spout, or on the handle base. Some older units carry the number on a small tag inside the cabinet. Write down the model number, the finish, and whether the faucet is a single-handle, two-handle or widespread design.
Shopping for one? See our guide: 6 Best Delta Faucet Replacement Parts (2026): Expert Picks.
If the number is worn off, measure the spout reach, height and the mounting hole spacing. Those measurements narrow the search and help you compare against catalog drawings.
Step 2: Locate the Catalog or Diagram
Delta publishes parts information through its website and its customer service line, and older catalogs are often archived by third-party parts sellers. Search using the model number followed by the words “parts diagram” or “exploded view.” Confirm the diagram matches your faucet by comparing the handle shape and spout profile against the drawing. Keep in mind that a diagram from a similar-looking model can list different cartridges or stems, so verify before ordering.
Step 3: Match the Part Numbers
Each component in the diagram is labeled with a reference number, and the accompanying parts list gives the Delta part number and description. Compare your worn part against the illustration and confirm the description. Manufacturers specify that replacement parts should be ordered by the part number, not just the name, because the same function (a cartridge, for example) can differ between series.
For a deeper look at sourcing discontinued components, see Discontinued Delta Faucet Parts: How to Find and Replace Them (2026). If you are working on a specific fixture, Delta Faucet Repair Parts: Find, Identify and Install the Right Ones covers identification in more detail.
Step 4: Verify Before You Order
- Note the model number, finish and series from the faucet body.
- Find the matching diagram and circle the failed component.
- Record the Delta part number from the parts list.
- Take the old part to a hardware store if you want a visual check.
- Order by part number and keep the receipt in case the fit is off.
Recommended gear
A small set of basic tools makes disassembly and part comparison much easier when you are working from a diagram.
- Basin wrench: Reaches the mounting nuts under the sink, where older Delta faucets are often tight and hard to access. View on Amazon
- Plumber’s grease: Lubricates O-rings during reassembly so they seat without tearing. View on Amazon
- Digital calipers: Measure stem and cartridge dimensions to confirm a replacement matches the original. View on Amazon
Common mistakes
- Ordering by part name alone, which can pull up the wrong cartridge or stem for your series.
- Assuming a diagram for a newer model applies to an older faucet with the same handle style.
- Skipping the shutoff valves and leaving water pressure on during disassembly.
- Discarding the old part before comparing it to the diagram.
- Forgetting that finish and handle color are separate from the functional part numbers.
FAQ
Where can I find an old Delta faucet parts catalog for free?
Delta’s website and customer service team are the most reliable starting points, and many parts diagrams are published online for free. Archived catalogs also appear on parts retailers’ sites, so check that the model number matches exactly.
What if my faucet model number is missing?
Measure the spout reach, handle type and mounting hole spacing, then compare those against catalog drawings. You can also photograph the faucet and send it to Delta’s support team for identification.
Can I use a part from a different Delta series?
Sometimes, but not reliably. Cartridges and stems often differ between series even when they look similar, so match the part number from the catalog for your exact model before installing.
Conclusion
An old Delta faucet parts catalog is most useful when you start with the model number and work through the diagram to a specific part number. Verify the match before ordering, and keep your old part as a reference. A few minutes of careful identification saves a second trip to the hardware store.
