Updated November 2026
When your kitchen sink is stopped up, water backs up or drains very slowly, and the cause is usually grease, food scraps or soap buildup in the trap or drain line. In most cases you can clear the clog yourself in under an hour using a plunger, hot water and a simple drain snake. This guide walks through the steps in order, starting with the least invasive fix.
Find Out Where the Clog Is
Before you start, check whether the problem is only in the sink or in the whole drain system. If the sink is slow but your dishwasher and other fixtures drain normally, the clog is likely in the sink’s own drain line or trap. If water is also backing up in a second sink or the tub, the blockage is probably further down the main line and may need a snake that reaches farther.
Shopping for one? See our guide: 6 Best Sink Strainers for Kitchen Sink (2026): Expert Picks.
Also look for signs of a vent problem, such as gurgling sounds when another fixture drains. A vent issue can mimic a clog, and plunging will not fix it. If you are unsure, see our guide to Sink Clogged in Kitchen: 6 Fixes That Clear the Drain Fast for more diagnostic clues.
Clear a Stopped Up Kitchen Sink Step by Step
Work through these steps in order. Stop as soon as the water drains freely.
- Remove the stopper or strainer basket and clear out any visible debris by hand. Wear gloves.
- Bail out standing water with a cup or small container so the plunger can seal properly.
- Plunge with a sink plunger. Cover the drain completely, and if you have a double sink, block the second drain with a wet rag. Push down gently and pull up sharply 10 to 15 times.
- Flush with hot water. Run the tap for a minute or two. If the sink is greasy, carefully pour a kettle of very hot water down the drain, not boiling water on a PVC pipe.
- Clean the trap. Place a bucket under the P-trap, unscrew the slip nuts by hand, empty the trap, and rinse it out. Reassemble and check for leaks.
- Use a drain snake if the clog remains. Feed the snake into the drain, turn the handle to break up the blockage, then pull it out and run water to test.
When a Snake Is the Right Tool
A plunger works best on soft clogs close to the drain opening. A hand-cranked drain snake can reach past the trap into the branch line, which is where hair, grease and food particles tend to collect. Feed the cable slowly and stop if you feel strong resistance, since forcing it can scratch the pipe or damage a PVC joint.
If the clog persists after snaking, the blockage may be in the main drain or the vent. At that point, a licensed plumber can use a motorized auger and a camera to locate the problem.
Recommended gear
- A cup-style sink plunger: the flat-bottomed cup seals well on a kitchen basin and is easy to control. View on Amazon
- A hand-crank drain snake: a short auger reaches past the trap and handles most kitchen clogs without a lot of mess. View on Amazon
- A bucket and slip-joint pliers: needed to empty the P-trap safely before you remove it. View on Amazon
Common Mistakes to Avoid
- Pouring chemical drain cleaners into a sink you plan to snake, since the chemicals can splash onto your skin or eyes.
- Using boiling water on PVC or CPVC pipe, which can soften joints.
- Plunging without blocking the second basin of a double sink, which wastes pressure.
- Overtightening slip nuts when you reassemble the trap, which can crack plastic threads.
- Ignoring a slow drain that returns. Repeated clogs often mean grease buildup that needs a deeper cleaning.
FAQ
Why is my kitchen sink stopped up even after plunging?
The clog may be past the trap, in the branch line, or the plunger may not be sealing well. Try cleaning the trap and using a drain snake before plunging again.
Is it safe to use chemical drain cleaner?
Chemical cleaners can damage pipes and cause burns, and they do not work well on all clogs. If you have already used one, avoid snaking until the water has been flushed out, and consult a plumber if you are unsure how to handle the residue.
When should I call a plumber?
Call a licensed plumber if water backs up into other fixtures, if several drains are slow at once, or if DIY methods fail. These signs can point to a main line problem.
Conclusion
A stopped up kitchen sink is usually a simple clog that yields to a plunger, a trap cleaning or a drain snake. Work from the easiest fix to the most involved, and check for signs that the problem runs deeper. With the right tools and a little patience, most drains will run freely again within an hour.
Related reading
- Water Pressure on Kitchen Sink Low: 6 Causes and Fixes (2026)
- Using Plunger on Kitchen Sink: 5 Steps to Clear a Clog Fast
- Under Sink Organiser Kitchen: 7 Steps to a Clutter-Free Cabinet
- Unclogging a Kitchen Sink: 6 Steps That Clear Most Drains Fast
- Top 7 Stainless Steel Kitchen Sink Maintenance Products Compared
