Updated November 2026

A delta touch faucet parts diagram is an exploded drawing that labels every component of your faucet, from the spout and cartridge to the touch sensor and supply lines. To get one, you need your exact model number, which is usually stamped on the faucet body, under the sink or in the original packaging. Once you have that number, you can match each labeled part to what you see under the sink and order the correct replacement.

Step 1: Locate Your Delta Model Number

Delta model numbers typically follow a pattern such as 9178T-DST or 9192T-DST, where the letters after the digits indicate finish and features. Check the underside of the faucet base, the back of the spout, or the instruction sheet that came in the box. If the faucet is installed and you cannot see a label, take a photo of the handle and spout and compare it against Delta’s published catalog images.

Shopping for one? See our guide: 6 Best Delta Faucet Replacement Parts (2026): Expert Picks.

Step 2: Find the Diagram That Matches Your Model

Delta publishes parts diagrams on its support site, and many plumbing distributors host the same drawings. Search using the full model number rather than the faucet name, because a single product line often has several variants with different internal parts. If you are working with an older faucet, our guide to Old Delta Faucet Parts Catalog: How to Find the Right Diagram covers how to track down discontinued drawings.

Step 3: Read the Diagram and Match Parts to Your Faucet

Diagrams use numbered callouts that correspond to a parts list. Start by identifying the large components, then work inward to the small ones. The touch sensor module, the valve body and the cartridge are the parts most often needed for repairs. Compare the diagram with your faucet by taking the faucet apart only as far as necessary, and photograph each step so you can reassemble it correctly.

  1. Note the model number and finish code.
  2. Open the diagram beside your faucet or a photo of it.
  3. Match each callout number to a physical part under the sink.
  4. Record the part number printed in the parts list.
  5. Confirm the part number before you order.

Step 4: Order the Right Replacement Part

Order by the Delta part number from the diagram, not by the description alone, since many components look alike across models. If a touch sensor or cartridge is the problem, consider reviewing how the system works before swapping parts; Touch Sink Faucet Delta: How It Works and How to Set It Up Right explains the sensor layout in plain terms. For symptoms that point to a specific fault, Touch Faucet Delta Problems: 6 Common Causes and Easy Fixes helps you narrow down the cause before you spend money on parts.

Tools You Will Likely Need

  • Adjustable wrench or basin wrench
  • Phillips and flathead screwdrivers
  • Plumber’s grease for O-rings
  • Bucket and towels to catch residual water
  • Flashlight for the work area under the sink

Common Mistakes to Avoid

  • Ordering by faucet name instead of the exact model number and finish code.
  • Shutting off the water supply but not relieving pressure by running the faucet first.
  • Skipping photos before disassembly, which makes reassembly harder.
  • Reusing old O-rings or washers rather than replacing them with the diagram’s listed parts.
  • Forgetting that touch faucets also require power or battery service checks before blaming a part.

A basic set of plumbing tools makes it easier to follow the disassembly sequence shown in most diagrams.

  • A basin wrench helps you reach the mounting nuts under the sink, where a diagram’s base components are attached. View on Amazon
  • Silicone-based plumber’s grease keeps O-rings seated and reduces wear when you reassemble the valve. View on Amazon
  • A small magnetic parts tray keeps screws and clips in order so nothing goes missing during the repair. View on Amazon

FAQ

Where can I find a Delta faucet parts diagram for free?

Delta’s official support pages and many plumbing supply sites offer diagrams at no charge. Search by full model number to make sure the drawing matches your faucet.

What if my model number is missing or worn off?

Compare the faucet’s shape, handle style and spout height against Delta’s catalog images, or check the original packaging and invoice. A photo of the faucet can also help a supplier identify the correct drawing.

Should I consult a professional before replacing parts?

For gas lines, electrical work or significant plumbing changes, consult a licensed plumber. Simple cartridge or O-ring replacements are usually manageable for homeowners who turn off the water first.

Conclusion

A delta touch faucet parts diagram works best when you start with an accurate model number and match each callout to the physical part. Take photos as you go and order by Delta’s part number to avoid mismatches. With the right drawing in hand, most replacements become a straightforward, methodical job.

Caleb Morgan

About Caleb Morgan

Caleb Morgan is part of our editorial team and reviews and edits our kitchen faucets & sinks guides, checking product details against manufacturer specifications and owner feedback.