Updated November 2026

A delta bathtub faucet parts diagram is an exploded drawing that shows every component of your tub faucet, from the handle screw to the cartridge and diverter. Once you have the right diagram for your exact model, you can identify the failing part, confirm its name and order a replacement that will actually fit. This guide walks through finding the correct diagram, reading it and matching it to the parts you need.

Find Your Model Number First

Delta diagrams are organized by model, not by product family, so the model number matters more than anything else. Look for a stamped or molded code on the faucet body, on the back plate or under the handle cap. The number usually begins with a letter followed by digits, such as a T-series or R-series code for trim kits and bodies. If the faucet has been removed, check the packaging, the original installation sheet or the cartridge housing.

Shopping for one? See our guide: 7 Best Repair Delta Bathtub Faucet Parts and Kits for Leaks (2026).

If the marking is worn away, you can often identify the faucet by its handle style and spout shape, then compare photos on Delta’s site. A close match is not enough, though. Two faucets that look identical can use different cartridges, so confirm the model before you order anything.

Locate the Correct Diagram

Search the model number along with the words “parts diagram” on the Delta website or in the online parts catalog. Delta publishes exploded views that label each component with a reference number, which corresponds to a part number in the parts list beside the drawing. Older models may only appear in a catalog PDF, so keep the document open while you work. For discontinued models, the diagram may still be available even when the parts are not, which helps you confirm what you need before searching secondary suppliers.

Read the Diagram and Match Each Part

Exploded diagrams are easiest to read when you work from the outside in. Start at the handle and trim, then move to the escutcheon, the valve body and finally the internal cartridge and seals. Each numbered callout points to one component, and the parts list gives its description and part number. Pay attention to notes such as “order as a set” or “sold with,” because some items, like O-rings and springs, are packaged together.

When you match a worn part, compare it physically with the drawing. Measure the stem length, count the notches on a stop or check the shape of a seat cup before ordering. Diagrams show what a part does, but your hands confirm whether it is the right size.

Steps to Identify a Part

  1. Record the full model number from the faucet body.
  2. Open the matching exploded diagram and note the reference numbers.
  3. Remove the handle and trim, then photograph the internal parts.
  4. Match each suspect part to its callout and part number.
  5. Order the part number listed for your model, not a generic equivalent.

Tools and Supplies to Have Ready

  • Phillips and flat-head screwdrivers, plus a small Allen wrench for set screws
  • Plumber’s grease for O-rings and cartridge seals
  • A soft cloth to protect the finish on handles and trim
  • Your phone camera, for photographing parts before disassembly

Tips and Common Mistakes

  • Don’t rely on a faucet’s appearance alone. Similar-looking Delta models often use different cartridges.
  • Shut off the water supply before removing any trim or valve components.
  • Keep small parts together in a labeled container so nothing gets lost.
  • Check that the diagram matches the faucet’s finish and handle type, since the trim assembly can vary.
  • Owners often report that ordering by part number, rather than by description, avoids the most returns.

A simple plumber’s grease helps seals slide into place without tearing and keeps cartridges moving smoothly. View on Amazon

A magnetic parts tray keeps screws and small springs from rolling into the tub drain during disassembly. View on Amazon

FAQ

Where is the model number on a Delta tub faucet?

It is usually stamped or molded on the faucet body, the back plate or beneath the handle cap. Older faucets may show it only on the original packaging or installation sheet.

Can I use a diagram from a different Delta model?

It is risky. Models in the same series can use different cartridges, stems and seals, so use the diagram that matches your exact model number.

What should I do if the diagram shows a part that’s no longer sold?

Check whether a newer part number supersedes it, or search for a compatible kit. For discontinued components, see our guide to finding replacements, and consult a licensed plumber if the repair involves major valve work.

Conclusion

A delta bathtub faucet parts diagram becomes useful once you have the exact model number and know how to read the callouts. Match each worn component to its part number, check it against the physical part and order accordingly. With the right diagram in hand, most tub faucet repairs come down to a few careful steps.

Caleb Morgan

About Caleb Morgan

Caleb Morgan is part of our editorial team and reviews and edits our kitchen faucets & sinks guides, checking product details against manufacturer specifications and owner feedback.