Updated November 2026
Shopping for a b&k frost free faucet repair kit usually starts with one problem: an outdoor spigot that drips, sprays from the stem, or refuses to shut off after a hard freeze. This list focuses on kits and replacement parts built for B&K and similar anti-siphon frost-free sillcock valves. We weighed brand fit, whether the kit covers the stem or the full valve, owner feedback patterns, and how clearly each listing states compatibility.
Our top picks at a glance
- 1
TOP CHOICEBest overallB&K Industries 888-183 Frost Free Anti-Siphon Wall FaucetView on Amazon - 2
TOP CHOICEBest for stem-only swapsB & K LLC 888-557 Stem Assembly Anti-Siphon Frost-FreeView on Amazon - 3
TOP CHOICEBest for cold-side leaksBK Products Cold Faucet Repair Kit For B & KView on Amazon - 4
Best for full valve rebuildsOutdoor Faucet Repair Kit with Vacuum Breaker and Metal HandleView on Amazon - 5
Best for hose bib and wall hydrant jobsOutdoor Faucet Repair Kit, ASSE 1019-A Anti-Siphon FrostproofView on Amazon
Our Top Picks
Quick Comparison
| Product | Best for | Key feature |
|---|---|---|
| B&K Industries 888-183 Frost Free Anti-Siphon Wall Faucet | Overall replacement | Complete anti-siphon wall faucet |
| B & K LLC 888-557 Stem Assembly | Stem-only swaps | Direct stem replacement |
| BK Products Cold Faucet Repair Kit | Cold-side leaks | Cold-side seal components |
| Outdoor Faucet Repair Kit (B0H2L3G51Y) | Full valve rebuilds | Includes vacuum breaker |
| Outdoor Faucet Repair Kit (B0DL9F61X9) | Hose bib and hydrant jobs | ASSE 1019-A rated parts |
B&K Industries 888-183 Frost Free Anti-Siphon Wall Faucet
Best for: Overall replacement
This suits homeowners who would rather replace the whole frost-free unit than rebuild an aging valve. It matches the B&K line the search term points to. We also found 6 Best Freeze Free Faucet Repair Kits for Winter Leaks (2026) useful on this point.
Pros:
- Complete unit avoids mismatched parts
- Anti-siphon design is built in
Cons:
- Requires fully shutting off and draining the line before install
B & K LLC 888-557 Stem Assembly Anti-Siphon Frost-Free
Best for: Stem-only swaps
Best for owners whose valve body is sound but whose stem is dripping or stiff. Confirm the stem length against your old one before buying.
Pros:
- Targets the most common failure point
- Lower effort than a full replacement
Cons:
- Does not fix a cracked valve body
BK Products Cold Faucet Repair Kit For B & K
Best for: Cold-side leaks
A fit for owners who see water weeping from the cold-side connection rather than the spout. It is a repair kit, so it suits a bench-level fix.
Pros:
- Focused on seals and washers
- Useful for a targeted leak fix
Cons:
- Narrower scope than a full stem or valve
Outdoor Faucet Repair Kit with Vacuum Breaker and Metal Handle
Includes vacuum breaker and metal handle for anti-siphon frost-free sillcock valves, wall hydrants and hose bib repairs Outdoor Faucet Repair Kit for VACVBKX1B Vacuum Breaker, ASSE 1019-A
Best for: Full valve rebuilds
Works for homeowners who want the vacuum breaker and handle included, especially when the old handle is worn or the breaker is suspect.
Pros:
- Covers multiple components in one kit
- Includes a metal handle
Cons:
- Overkill if only a washer needs replacing
Outdoor Faucet Repair Kit, ASSE 1019-A Anti-Siphon Frostproof
Outdoor Faucet Repair Kit,ASSE 1019-A Water Hose of Home Improvement,Anti-Siphon Frostproof Faucet Valve Hose Faucet Fitting Repair Kit for VACVBKX1B Vacuum Breaker,Metal Handle
Best for: Hose bib and wall hydrant jobs
Aimed at hose bibs and wall hydrants where the ASSE 1019-A anti-siphon rating matters for code and backflow protection.
Pros:
- Lists ASSE 1019-A compliance
- Metal handle included
Cons:
- Check the listing against your valve model before ordering
Buying Guide
Confirm the valve model and brand
B&K valves come in several generations, and stems are not always interchangeable. Look for a model number stamped on the valve body or handle before you shop.
Decide between stem and full valve
If the valve body is cracked or weeping at the base, a stem kit will not solve the problem. A stem swap is usually enough when drips come only from the spout.
Check for anti-siphon and ASSE 1019-A rating
Anti-siphon protection keeps water from being drawn back into the supply line. Many local codes reference the ASSE 1019-A standard for frost-free hose bibs.
Measure stem length
Measure the old stem from the packing nut to the tip before ordering. A stem that is a quarter inch too long or short will not seat properly.
Good picks for this: B&K Industries 888-183 Frost Free Anti-Siphon Wall Faucet and B & K LLC 888-557 Stem Assembly
FAQ
Will a B&K frost free faucet repair kit fix a spigot that drips from the spout?
Dripping from the spout usually points to a worn stem or a damaged washer inside the valve. A stem assembly or full repair kit for your specific B&K model is often the right fix. Shut off the water supply before you start the repair.
How do I know if I need a stem kit or a full valve replacement?
If the faucet body is still solid and only leaks when the handle is turned on or off, a stem replacement is typically enough. If the housing is cracked, the frost-free mechanism has failed, or the valve won’t drain, a full valve replacement is the safer choice. Inspect the body for splits before ordering.
Does the kit need to be anti-siphon compatible?
Yes, in most areas outdoor hose bibs are required to have an anti-siphon device to keep garden water from flowing back into your home supply. Look for kits that list an ASSE 1019-A rating or include a vacuum breaker. Using a non-anti-siphon part on a hose bib can create a cross-connection risk.
How do I measure the stem length I need?
Measure from the back of the valve body to the tip of the stem, and compare that length to the specifications in the kit listing. Some installations also depend on the wall thickness where the faucet mounts. Matching the length prevents the handle from sitting too loose or too tight.
Can I install one of these kits myself?
Most homeowners with basic hand tools can replace a stem or valve, though it helps to have a wrench, a bucket, and a towel on hand. Make sure the faucet is fully drained before you disconnect anything. If the valve is buried deep in the wall or the pipe is corroded, a plumber may be the better choice.
Why does my frost-free faucet still leak after a repair?
A new part can fail if the valve was not fully drained before winter, if the seat or washer is installed backward, or if the stem was not tightened to the correct torque. Also check that the hose is disconnected and the handle is fully closed during the next freeze. Recheck the fit and seating if the leak continues.
Conclusion
If your B&K valve body is in good shape and only the internal parts have worn out, a stem-focused kit is the most economical choice. Homeowners dealing with a cracked housing or a valve that no longer drains properly should choose a full replacement faucet instead.
Before buying, confirm your brand and model, check the anti-siphon rating, and measure the stem length so the kit you order actually fits your spigot.
