Updated November 2026

An old Delta faucet logo can tell you more than the brand name. By reading the mark, its placement and the text around it, you can estimate the faucet’s age, narrow down the product line and start looking for the right replacement parts. This guide shows you where to look and what each clue means.

Where to Find the Logo on an Older Delta Faucet

Delta usually places its name or triangle mark on the visible faces of the faucet body, the spout, or the handle escutcheon. On single-handle kitchen faucets, check the base of the spout and the top of the handle. On widespread bathroom faucets, look at the handle caps and the escutcheon plates behind them. Many older units also carry a stamped mark on the underside of the spout or near the base where it meets the deck.

Shopping for one? See our guide: 6 Best Delta Faucet Replacement Parts (2026): Expert Picks.

Use a flashlight and a soft cloth. Mineral residue and soap film can hide faint lettering, and a gentle wipe often reveals text that looked blank at first.

What the Logo Style Tells You About Age

Delta has changed its wordmark and triangle styling over the decades. Broadly speaking, the following patterns help with dating:

  • Raised or cast lettering on the spout or body often appears on older metal-bodied faucets.
  • Smaller, stamped marks with the word “Delta” and a model code usually indicate a later production run.
  • Logo plus a separate date or foundry code is more common on castings and can be matched to production records if you can find them.

Treat these as clues, not proof. Two faucets from different eras can share a similar mark, so combine the logo with other details before you decide.

Match the Mark to a Model Number

The logo alone rarely identifies a model. Look for the model or series number, which is often stamped near the logo or on the underside of the faucet. Write down every character exactly, including letters that look like zeros or the letter O. Then compare the number against Delta’s parts diagrams, which list the cartridge, stem, seats and springs for each model.

If you are looking for a diagram, the guide Old Delta Faucet Parts Catalog: How to Find the Right Diagram explains how to search by model number and confirm the match before you order.

Checklist for Identifying Your Faucet

  1. Photograph the logo, spout and handle from several angles.
  2. Locate and record the model or series number.
  3. Note the handle style: single lever, two separate handles, or a touch-activated design.
  4. Count the holes or mounting points in the sink or tub deck.
  5. Compare everything against an official parts diagram before ordering.

Confirm the Model Before Buying Parts

Delta has used many internal cartridge and stem designs across its product lines, and parts that look similar often do not interchange. Ordering by logo alone is the most common reason for returns. Once you have a model number, check the diagram and note the exact part name, such as the cartridge, stem or handle adapter.

Shut off the water supply before you remove any part. Turning the handle to close the valve is not enough, because old supply valves may not seal fully.

Common Mistakes

  • Assuming a faucet is a specific model because the logo looks familiar.
  • Scrubbing lettering with abrasive pads, which can erase stamped marks.
  • Ignoring a model number that is partly worn, instead of checking it against a diagram.
  • Buying a replacement cartridge without confirming the handle type and mounting style.
  • Forgetting to photograph the faucet before taking it apart, which makes reassembly harder.

FAQ

Does the Delta logo show the exact year my faucet was made?

Not reliably. The logo style offers a rough age range, but production dates are usually not printed on the faucet. Use the model number and a parts diagram to narrow things down.

Where is the model number usually stamped?

It is often near the logo, on the underside of the spout, or on the base of the body. Some older faucets have it only on a tag or on a component inside the body.

What if the logo is worn off completely?

Check the spout underside, the handle escutcheon and the base of the faucet for smaller stamped text. If you still cannot find it, a plumbing supply store or a licensed plumber can help you identify the unit from its shape and hardware. Consult a professional before doing any work on a supply line you are unsure about.

Conclusion

An old Delta faucet logo is a useful starting point, but the model number and handle style do most of the identifying work. Photograph the faucet, record every number and compare it with an official diagram before you buy anything. That approach saves time and prevents mismatched parts.

Caleb Morgan

About Caleb Morgan

Caleb Morgan is part of our editorial team and reviews and edits our kitchen faucets & sinks guides, checking product details against manufacturer specifications and owner feedback.