By Caleb MorganUpdated November 2026
If you are shopping for a moen faucet aerator replacement, the Moen 101010 Male Threaded 1.5 GPM Replacement Aerator in chrome is one of the more straightforward options for a Moen faucet that has lost its original screen or is spraying unevenly. It suits homeowners who want a direct-fit part with a flow rate that matches common Moen spout designs, and anyone who prefers a single-part fix over replacing the whole faucet. It is less suited to people who want a noticeably stronger spray for heavy pot-filling, who need a non-standard thread size, or who want a water-saving aerator with a different flow setting. Before ordering, confirm your faucet’s aerator thread and flow rating, since a mismatch is the most common reason these parts get returned.
chrome finish, 1.5 GPM Male Threaded Replacement Aerator, designed as a replacement aerator for Moen faucets Moen 101010 Male Threaded 1.5GPM Replacement Aerator, 13/16 Threads, Chrome
Product Overview
The Moen 101010 is a male-threaded aerator sold as a replacement for Moen faucets. Aerators are the small, screw-on component at the tip of the spout. They mix air into the water stream, which keeps the flow feeling full while using less water, and they also trap sediment and mineral debris. Over time, that debris clogs the mesh screen, causing sputtering, a fan-shaped spray that splashes, or a weak stream. Replacing the aerator is usually the first troubleshooting step for these symptoms, long before cartridge or valve work becomes necessary.
This listing is for a chrome-finish part with a 1.5 gallons-per-minute (GPM) rating and a 13/16-inch thread size. The product name identifies it as a male-threaded unit, meaning the threads are on the outside of the aerator body and screw into the female threads inside the faucet spout. Owners often treat it as a like-for-like swap: unscrew the old aerator, clean the seat, and thread the new one in by hand before snugging it with a wrench or the aerator key.
Because aerator threads and flow ratings vary across faucet families, the main thing to verify is that your existing aerator is male-threaded and close to 13/16 inch. If your faucet uses a female-threaded aerator, this part will not seat correctly.
Key Features & Specifications
| Specification | Detail |
|---|---|
| Product type | Replacement faucet aerator |
| Compatible brand | Moen faucets |
| Thread style | Male threaded |
| Thread size | 13/16 inch |
| Flow rate | 1.5 GPM |
| Finish | Chrome |
| Model number | 101010 |
Manufacturers typically specify the flow rate as a maximum at a given water pressure, so actual output will depend on your home’s supply pressure. Confirm thread size with a caliper or by comparing the old aerator’s threads to a ruler before buying.
Pros & Cons
Pros
- Labeled as a direct replacement for Moen faucets, which simplifies compatibility checks.
- Male-threaded design matches the most common Moen aerator style.
- The 1.5 GPM rating is a moderate, water-conscious flow that many households prefer for everyday sink use.
- Chrome finish is intended to match standard Moen chrome fixtures.
- Replacing an aerator is a low-effort, low-tool repair compared with cartridge or valve work.
Cons
- Flow is at the lower end of common kitchen aerator ratings, which some users find too gentle for filling large pots quickly.
- Thread fit depends on exact faucet design; buyers with older or non-standard Moen spouts may need to confirm before ordering.
- Like all aerators, it will need periodic cleaning in hard-water areas to keep the spray even.
- Chrome finish will not match brushed nickel, bronze or matte black Moen finishes.
Performance Analysis
Performance for an aerator depends on three things: the flow rating, the spray pattern the aerator creates, and how well it resists clogging. The 1.5 GPM rating places this part at a conservative flow for a sink. In practical terms, that means lower water use and a softer stream, which many owners prefer for handwashing and rinsing dishes but find slower when filling a stockpot.
Owner feedback patterns for replacement aerators generally focus on three areas. First, fit: buyers who measured their threads and confirmed a male fitting tend to report a clean installation, while those who skipped that step often return the part. Second, spray quality: a new aerator usually restores a round, even stream, which is the main reason people replace these parts. Third, durability in hard water: mineral buildup can return within months in homes with high calcium content, so periodic cleaning is a realistic expectation rather than a defect.
Because aerators are simple mesh-and-plastic or metal assemblies, long-term performance mostly depends on water quality and maintenance. Soaking the aerator in white vinegar every few months and brushing out debris is a common way owners extend its useful life.
For more on keeping a Moen spout performing well, see Moen Faucet Screen Replacement: Step-by-Step Guide for 2026 and Moen Faucet Aerator Wrench: How to Remove and Clean the Aerator (Step-by-Step).
Who Should Buy This Product?
This aerator makes sense for homeowners who have confirmed their Moen faucet takes a male-threaded aerator, want a moderate-flow replacement, and need a quick fix for sputtering or uneven spray. It is also a reasonable choice for renters or first-time DIYers who want a low-risk repair that does not involve shutting off the supply or disassembling the valve.
Skip this part if your faucet has a female-threaded aerator, if you need a stronger flow for frequent large-pot filling, or if your faucet finish is not chrome and you care about visual match. In those cases, a flow-rate or finish-specific alternative is a better fit. If the spray problem persists after replacing the aerator, the issue is more likely in the cartridge or valve, and a guide like Moen Faucet Valve Cartridge: Step-by-Step Replacement Guide (2026) will help you diagnose it.
Buying Guide
Choosing a moen faucet aerator replacement comes down to four checks: thread style, thread size, flow rating and finish. Start by unscrewing your current aerator and noting whether the threads are on the outside (male) or inside (female). Measure the outer diameter of male threads; 13/16 inch is the size in this listing. Next, consider flow. Standard kitchen aerators range from roughly 1.5 to 2.2 GPM, and a higher number delivers more water per minute. If you fill large pots often, a higher-flow option may suit you better. Finally, match the finish to your faucet if appearance matters to you.
Two other considerations: check whether your faucet has a pull-down spray head, since that uses a different component than a standard spout aerator, and make sure you have the correct aerator key or a small wrench to remove the old unit without scratching the spout. For a broader view of parts that go with your faucet, see Moen Kitchen Faucet Replacement Parts: Find and Install the Right One.
Well-known alternatives to consider:
- Moen 116711 Faucet Aerator 1.5 GPM (2-pack): A 1.5 GPM replacement sold as a two-piece set, which is useful if you want a spare for another sink or a future swap.
116711 Faucet Aerator 1.5 Gpm for Moen Bathroom Kitchen Sink Inserts Replacement Parts 2 pcs
- Moen 3919 2.2 GPM Male Thread Kitchen Faucet Aerator, Chrome: A higher-flow chrome option for owners who want a stronger stream for filling pots and rinsing produce.
chrome finish, 2.2 GPM Replacement Faucet Aerator, provides robust water delivery for everyday washing and cleaning tasks Moen 3919 2.2 GPM Male Thread Kitchen Faucet Aerator, Chrome
For readers comparing aerator brands and sizes, 7 Best Aerators for Delta Faucet Replacements Compared (2026) offers a useful reference point for thread and flow differences.
FAQ
How do I know if my Moen faucet needs a new aerator?
Common signs include sputtering, a spray that splits into multiple streams, a weak or uneven flow, or visible debris caught in the tip. Unscrew the aerator and look at the mesh screen. If it is clogged with mineral deposits or sediment, cleaning or replacing it should fix the problem. If the flow is still poor after a fresh aerator, check the spout and cartridge next.
What thread size do I need for a moen faucet aerator replacement?
Many Moen aerators use a 13/16-inch male thread, which is the size listed for this product. Measure the outside diameter of the male threads on your old aerator, or compare it against the size stated on the new part. If you are unsure, bring the old aerator to a hardware store for a direct comparison.
Can I replace a Moen aerator without tools?
Often you can, if the aerator is hand-tight. Many owners wrap a rubber glove or a cloth around the aerator for grip. For a tight or mineral-bound aerator, a dedicated aerator key or small wrench works better and reduces the risk of scratching the chrome. Avoid pliers without padding.
How often should I clean or replace a faucet aerator?
Owners in hard-water areas often clean aerators every few months, and replace them when cleaning no longer restores a good spray. In homes with softer water, an aerator may last a year or more. There is no universal schedule, so checking the screen periodically is the most reliable approach.
Will a 1.5 GPM aerator lower my water pressure?
A 1.5 GPM aerator reduces flow compared with older, higher-flow fixtures, but it does not reduce pressure in the same way a clogged aerator does. The stream may feel softer and take longer to fill a container. If the stream is weak across the board, check the supply valves and cartridge before assuming the aerator is the cause.
Is a male-threaded aerator the same as a female-threaded one?
No. A male-threaded aerator has threads on its outside edge and screws into the spout. A female-threaded aerator has threads on the inside and screws onto a male fitting on the spout. Using the wrong style will prevent the part from seating and can damage threads. Check your existing aerator before buying.
Do I need to shut off water to replace the aerator?
Usually no. Aerator replacement is a quick, low-pressure task, and most owners simply turn the faucet off, unscrew the aerator and swap it. Placing a towel in the sink helps protect the finish and catches any small parts that might fall.
Should I replace the whole faucet instead of the aerator?
Only if the faucet is old, leaking at the base or has a worn cartridge that causes persistent drips. An aerator replacement is the right first step for spray problems, and it costs little time. For cartridge-related issues, see Replace Cartridge Moen Faucet: 6 Best Cartridges Compared (2026).
Final Verdict
Moen 101010 1.5 GPM Male Threaded Replacement Aerator
The Moen 101010 is a practical choice for homeowners who need a direct-fit, moderate-flow chrome aerator and who have confirmed their faucet uses a male-threaded 13/16-inch part. It addresses the most common aerator complaints, including sputtering and uneven spray, with a low-effort installation. Its main limitations are the moderate flow rate and the need to verify thread compatibility before ordering. If you want more water volume, one of the higher-flow alternatives in the Buying Guide will serve you better. If you want a spare or a multi-pack, the two-piece option is worth a look.
About Caleb Morgan
Caleb Morgan is part of our editorial team and reviews and edits our kitchen faucets & sinks guides, checking product details against manufacturer specifications and owner feedback.
