By Caleb MorganUpdated November 2026
A delta tub faucet diverter is the small part that sends water up to a showerhead or back down out of the tub spout, and the Delta Faucet RP61357BN Diverter Tub Spout in brushed nickel is one of the more common replacement options for homeowners whose spout has stopped diverting cleanly. This review is based on the manufacturer specifications on the listing and on patterns that owners commonly describe, not on hands-on testing. It is a good fit if you already know your Delta bath valve and want a matching brushed nickel spout that replaces a worn diverter. It is a poor choice if you need a full valve rebuild, a different finish, or a spout for a non-Delta fixture, because the part is designed to match Delta hardware specifically.
Delta Faucet RP61357BN Diverter Tub Spout, Brushed Nickel, 0.5
Product Overview
The RP61357BN is a replacement tub spout with an integrated diverter, sold under the Delta Faucet name and finished in brushed nickel. Its job is simple: when you pull the diverter knob or lift the lever, water is redirected from the spout to the showerhead. When you release it, flow returns to the spout. Many homeowners buy a part like this when the old spout still looks fine but the diverter no longer seats, so water leaks from the spout while the shower is running, or the shower pressure drops noticeably.
Because this is a spout-and-diverter assembly rather than a cartridge or stem, it is usually installed as a unit. That distinction matters. If your problem is a drip from the faucet handles, a new spout will not fix it, and you will need to look at the valve cartridge or stem instead. If your problem is water coming out of the spout when the shower is on, a worn diverter is a likely suspect, and this type of part is the right category to consider. For a broader look at which replacement component fits which symptom, see Replace Delta Tub Faucet: 5 Best Parts Compared (2026).
The product is positioned as a direct replacement for a Delta-style tub spout. Owners generally treat it as a matching-finish swap for existing Delta bath hardware, which is its main appeal over a generic universal spout.
Key Features & Specifications
The table below lists the specifications that appear in the product name and that Delta generally publishes for this type of part. Where a detail is not clearly stated, it is left out rather than estimated.
| Feature | Specification |
|---|---|
| Manufacturer | Delta Faucet |
| Model number | RP61357BN |
| Product type | Diverter tub spout |
| Finish | Brushed nickel |
| Function | Diverts water between tub spout and showerhead |
| Intended use | Replacement for Delta tub and shower diverter spouts |
| Listing reference | Amazon ASIN B004YK64RK |
Before ordering, measure the spout connection on your existing tub and confirm it matches the thread and mounting style the listing describes. Delta spouts are sized for specific valve bodies, so a mismatch is the most common reason a replacement fails to seal. Also confirm that your existing fixture finish is brushed nickel; mixing finishes can look uneven even when the part fits.
Pros & Cons
Pros
- Brushed nickel finish is a common match for many Delta bath and shower sets.
- Designed as a Delta-compatible replacement, which reduces guesswork on fit compared with universal spouts.
- Integrated diverter means you replace one part instead of rebuilding the diverter mechanism.
- Well suited to the common problem of a spout that leaks or fails to divert to the showerhead.
- Straightforward to identify by model number when you compare it with other Delta spouts.
Cons
- It is a spout-and-diverter part, so it will not fix drips from the handles or valve body.
- Fit depends on matching your existing Delta valve; a mismatch means returning the part.
- Owners who need a different finish, such as chrome or stainless, will need one of the alternatives below.
- Installation requires removing the old spout, which may need a spout wrench or a bit of penetrating lubricant if it is seized.
- Not a universal fit for non-Delta tubs or spouts.
Performance Analysis
Performance for a diverter spout comes down to two things: whether the diverter seals fully when engaged, and whether the spout stops dripping when it is off. Owners of Delta-style diverter spouts commonly report that a new spout restores clean diversion when the old one had worn internal seats, and that a drip from the spout usually stops once the new unit is seated and the threads are sealed. These are general patterns in owner feedback for this category, not measured results for this specific model.
Where owners report problems, they usually trace back to installation rather than the part itself. The most frequent complaints in this category involve threads that were not wrapped with plumber’s tape, a spout that was not tightened enough to seal against the wall pipe, and mixing a replacement spout with a valve that is worn internally. If the spout is new and still drips, the valve cartridge or the diverter seat inside the valve may be the actual source.
Flow and diverter action depend on the water pressure in your home. Low incoming pressure will make any diverter feel weaker, so a spout swap will not solve a whole-house pressure issue. If you suspect that, the symptoms and fixes are covered in Repair Tub Faucet Drip: A Step-by-Step Guide to Stop Leaks (2026).
Durability is generally tied to the finish and the internal diverter material. Brushed nickel is a forgiving finish that hides water spots well, though it can scratch if cleaned with abrasive pads. Owners who keep the spout clean with a soft cloth and mild cleaner tend to report fewer finish complaints over time.
Who Should Buy This Product?
This part suits homeowners who have a Delta bathtub or tub-shower setup in brushed nickel and have confirmed that the leak or diversion failure is coming from the spout. It also suits someone who wants a like-for-like replacement without changing the look of the bathroom. If you are replacing an entire bath trim set, or upgrading the valve, you may be better served by a complete fixture.
You should skip this product if your Delta spout is a different finish, if your tub is not a Delta system, or if your main issue is a faucet handle drip. In those cases, a different spout or a cartridge-level repair will fit better.
Buying Guide
Before you buy any delta tub faucet diverter, check four things: the finish, the valve brand, the spout style, and whether the problem is really the diverter. Remove the existing spout and look at the thread size and mounting style. Note the model number stamped on the old spout or valve if you can find it. Then compare that information against the listing.
If you decide the RP61357BN is not the right match, two other well-known Delta spouts are worth comparing. The first is a pull-down style diverter in stainless, which suits kitchens and baths where a different finish is wanted:
Delta Faucet RP17453SS Pull-Down Diverter, Stainless Tub Spout
The second is a standard diverter tub spout in chrome, a common choice when the rest of the bath hardware is chrome:
Delta Faucet RP19895 Standard Diverter Tub Spout in Chrome
When choosing among these, match the finish first, then the spout style, then confirm the connection size. For a wider comparison of replacement parts across repair scenarios, see Delta Bathroom Tub Faucet Parts: 8 Best Replacements Compared and 7 Best Tub Faucet Diverter Repair Kit Options for Common Leaks (2026).
FAQ
Will this spout stop water from dripping out of the tub faucet when the shower is on?
It can, if the old spout’s diverter was worn and letting water through to the spout. If the drip continues with a new spout installed, the cause is more likely the valve cartridge or the diverter seat inside the wall valve.
How do I know this part matches my Delta tub?
Check the model number on your existing spout or valve, confirm the finish is brushed nickel, and measure the spout connection. If any of these do not match the listing, do not install it. Return the part instead.
Do I need plumber’s tape on the threads?
Plumber’s tape or thread sealant is generally recommended on threaded spout connections to prevent leaks at the joint. Wrap the threads in the direction the spout will tighten, usually clockwise when viewed from the end of the pipe.
Can I install this myself?
Many homeowners replace a tub spout with basic hand tools, but a seized spout may need a spout wrench or penetrating lubricant. If the spout will not come off or you find damage inside the wall, consult a licensed plumber.
Will this fix low shower pressure?
Usually not. Low pressure is typically caused by the whole-house supply, a clogged showerhead, or a worn cartridge. A spout swap addresses the diverter path only.
Is brushed nickel harder to keep clean than chrome?
Brushed nickel generally hides water spots better than polished chrome, but it can scratch from abrasive cleaners. Use a soft cloth and a mild cleaner to protect the finish.
What if my Delta valve is older and the spout does not seal?
An older valve may have worn internal parts that a new spout cannot correct. In that case, check the cartridge or the valve body before assuming the spout is the problem. A licensed plumber can confirm the source if you are unsure.
Final Verdict
The Delta Faucet RP61357BN Diverter Tub Spout is a reasonable choice for a Delta owner with a brushed nickel bath who has confirmed that the spout or diverter is the failing part. Its main strengths are the matching finish and the Delta compatibility, and its main limit is that it does not solve valve or handle problems. Verify the fit before you buy, and if the finish or connection does not match, one of the alternatives above will serve you better.
About Caleb Morgan
Caleb Morgan is part of our editorial team and reviews and edits our kitchen faucets & sinks guides, checking product details against manufacturer specifications and owner feedback.
