Miles SinclairBy Miles Sinclair

Updated November 2026

Yes, Menards sells kitchen faucets, and the selection is broad enough to cover most common sink layouts. Shoppers usually find single-handle, two-handle, pull-down and pull-out designs from several brands, along with budget, mid-range and premium options. Stock varies by store and by season, so checking the online catalog or calling your local store before you drive over saves a wasted trip.

Why Menards Is a Common Stop for Kitchen Faucet Shoppers

Menards is a home improvement chain with a large plumbing aisle, which makes it a practical place to compare faucets in person. Many people shopping for a kitchen faucet at Menards are replacing a leaking or worn-out unit and want to pick up a part or a complete faucet the same day. Being able to see the spout reach, handle height and body finish in person helps avoid surprises that come with ordering a faucet sight unseen.

Shopping for one? See our guide: 7 Best Delta Kitchen Faucet Parts (2026): Repair-Ready Picks.

The store’s inventory usually leans toward widely available brands and common configurations. Specialty finishes, commercial-style sprayers and designer models may be limited to online ordering or a special order through the store. If you have a specific model number in mind, confirm it is in stock before you go.

Factors to Check Before You Buy a Kitchen Faucet

Fit matters more than appearance. Before you choose a faucet at Menards, measure the sink and countertop so the new unit will actually seat correctly.

  • Mounting holes: Single-hole, three-hole (center spout plus two handles) and four-hole (with a separate sprayer) setups each require a matching faucet. Count the holes in your sink or deck plate first.
  • Deck thickness: Many manufacturers list a maximum deck thickness, often in the range of about 1.5 to 2 inches. Measure from the underside of the sink to the countertop.
  • Spout reach and height: A standard spout might sit 7 to 9 inches above the deck, while a high-arc style may reach 14 inches or more. Check clearance under cabinets and above the sink.
  • Water supply lines: Most faucets use 3/8-inch compression supply lines, but confirm the connection type before installation.
  • Finish and wear: Chrome, stainless, brushed nickel, matte black and bronze finishes behave differently over time. Check the manufacturer’s care guidance for the finish you choose.

How to Choose the Right Style

Single-handle faucets are the most common choice because one lever controls both temperature and flow. Two-handle designs suit people who prefer separate hot and cold controls, though they take up more deck space. Pull-down sprayers are useful for rinsing large pots, while pull-out heads reach a bit farther and are often easier to direct. Touchless models add convenience but require power and sensor maintenance, so weigh that against your daily habits.

Check the cartridge type as well. Ceramic-disc cartridges are widely used and generally quiet and durable. If a faucet’s cartridge is proprietary, repair parts may be harder to find later, so look at replacement availability before you commit.

Practical Steps for Buying at Menards

  1. Measure your sink holes, deck thickness and the distance from the sink rim to the cabinet back.
  2. Write down the number of holes and the connection type for your supply lines.
  3. Search the Menards website for faucets that match your hole count and finish, then note the model numbers.
  4. Call or check the local store’s inventory to confirm the model is on the shelf or available for order.
  5. Inspect the box for the included parts list, mounting hardware, supply lines and any gaskets or O-rings.
  6. Keep your receipt and the packaging until you have tested the faucet for leaks.

Installation can be straightforward for an experienced DIYer, but if you are unsure about shutoff valves or connections, consult a licensed plumber. Turn off the water supply before removing the old faucet, and have towels and a bucket ready for residual water.

Does Menards carry kitchen faucets from major brands?

Menards typically stocks several well-known faucet brands, but the exact lineup depends on the store and season. Check the online listings or call your store to confirm what is available.

Can I order a kitchen faucet from Menards for pickup?

Many Menards locations allow online orders for in-store pickup or home delivery. Confirm the option for your ZIP code before placing an order.

How do I know if a Menards faucet will fit my sink?

Count your sink holes, measure deck thickness and compare those figures with the manufacturer’s listed specifications. A plumber can help if your sink has unusual hole spacing.

Should I replace the whole faucet or just the cartridge?

If the body and finish are still in good shape, replacing the cartridge may be enough. If the spout is corroded, the handle is loose or the faucet is outdated, a full replacement usually makes more sense.

Are Menards faucets good for everyday use?

Quality varies by brand and model. Focus on the cartridge type, warranty terms and finish durability rather than appearance alone, and read the manufacturer’s care instructions.

Ready to choose one?

Miles Sinclair

About Miles Sinclair

Miles Sinclair is part of our editorial team and reviews and edits our kitchen faucets & sinks guides, checking product details against manufacturer specifications and owner feedback.