As an Amazon Associate I earn from qualifying purchases. This page may contain affiliate links.
Kitchen Moen faucet repair usually comes down to one question: which replacement part will stop the leak, drip or stiff handle without forcing you to buy a whole new faucet? Moen single-handle kitchen faucets are common in American homes, and most of their problems trace back to a handful of wear points, including the valve cartridge, the handle mechanism, the mounting hardware and the O-rings that seal the spout. This guide compares five repair parts sold on Amazon US and explains how to match each one to the problem you are actually having. The selection method was research-based: we looked at published specifications, Moen’s own compatibility language, brand reputation for the part types, and recurring themes in owner feedback about fit and installation. We did not install or test these parts ourselves.
Our Top Picks
Quick Comparison
| Product | Best for | Key feature |
|---|---|---|
| Moen Faucet Repair Kit 93980 – Replacement Single Handle Mechanism for Kitchen Parts | Single-handle leaks at the base of the handle | Complete handle mechanism replacement |
| Moen Kitchen Faucet Repair Kit 113173 with Faucet Fixing Plate and Mounting Nut Hardware | Loose or wobbling faucets | Included fixing plate and mounting nut |
| Moen 93980 Replacement Handle Mechanism Kit for One-Handle Kitchen Faucet Repairs | Stiff or sticking handle movement | Single-handle mechanism replacement |
| Mounting Kit for Moen Kitchen Faucet Parts with 113173 Hardware Kit | Replacing worn mounting hardware | Mounting plate and nut set |
| Moen 1234 Duralast Handle Replacement Cartridge | Two-handle drips, hot or cold side | Hot or cold replacement cartridge |
Moen Faucet Repair Kit 93980 – Replacement Single Handle Mechanism for Kitchen Parts
Moen Faucet Repair Kit 93980 – Replacement Single Handle Mechanism for Kitchen Parts
This kit suits homeowners whose single-handle Moen kitchen faucet has begun leaking from the base of the handle or feels loose and inconsistent in its movement. It is the right first stop when the spout itself is fine but the control mechanism has worn out. Before buying, confirm your faucet is a single-handle Moen model that uses the 93980 mechanism family, since the handle mechanism must match your faucet’s internal design.
Key specs
- Part type: single-handle replacement mechanism
- Model reference: Moen 93980
- Application: Moen single-handle kitchen faucets
Pros
- Addresses the most common single-handle failure point, the mechanism itself
- Replaces the moving parts in one piece, avoiding piecemeal sourcing
- Clear model match makes compatibility checking straightforward
Cons
- Will not help if the leak is coming from the spout or the supply connections
- Owners often report that the old mechanism must be removed carefully to avoid damaging the faucet body
for Moen Kitchen Faucet Parts, Faucet Fixing Plate and Faucet Mounting Nut Hardware Kit 113173
for Moen Kitchen Faucet Parts,Faucet Fixing Plate & Faucet Mounting Nut Hardware Kit 113173 Kitchen Faucet Repair Kit for Moen Mounting Kit
This option is aimed at owners whose faucet rocks side to side, sits crooked on the sink deck, or has a loose base that allows water to seep past the mounting plate. It is less about the valve and more about the structure that holds the faucet in place. If the faucet works smoothly but moves when you lean on it, mounting hardware is the likely culprit.
Key specs
- Part type: faucet fixing plate and mounting nut hardware kit
- Reference number: 113173
- Application: Moen kitchen faucets
Pros
- Targets loose-faucet problems that other repair parts do not fix
- Includes both the fixing plate and the nut, so the set is matched
- Useful for resealing a base that has started to leak at the deck
Cons
- Does not repair internal valve leaks or handle stiffness
- Installation requires access under the sink, which can be tight in cabinets with plumbing and disposal hardware
Moen 93980 Replacement Handle Mechanism Kit for One-Handle Kitchen Faucet Repairs
Moen 93980 Replacement Handle Mechanism Kit for One-Handle Kitchen Faucet Repairs, Part
This is a good match for a Moen single-handle faucet that is hard to move, drifts out of position, or has lost its smooth temperature control. Stiffness and an uneven feel between hot and cold often point to a worn cartridge or mechanism, and a handle kit addresses that directly. Check the model reference on your existing mechanism before ordering.
Key specs
- Part type: one-handle mechanism replacement kit
- Model reference: Moen 93980
- Application: one-handle kitchen faucet repairs
Pros
- Directly targets stiff or sticky handle action
- Same reference family as the other 93980 listing, useful for comparing options
- Restores smooth control without replacing the whole faucet
Cons
- Owners often report that a second listing for the same reference can cause confusion, so confirm the exact contents
- Does not address leaks from the spout or supply lines
Mounting Kit for Moen Kitchen Faucet Parts, Includes Faucet Fixing Plate and Mounting Nut Hardware Kit 113173
Mounting Kit for Moen Kitchen Faucet Parts,Includes Faucet Fixing Plate & Faucet Mounting Nut Hardware Kit 113173 Kitchen Faucet Repair Kit for Moen
This kit fits readers who have already confirmed that the loose feel or base leak is coming from worn mounting hardware and want the full set in one order. It overlaps with the 113173 hardware option above, so it is best chosen when you specifically want a mounting-kit listing that is labeled for Moen kitchen faucet parts.
Key specs
- Part type: mounting kit with fixing plate and nut
- Reference number: 113173
- Application: Moen kitchen faucet parts
Pros
- Focused on the structural side of faucet repair
- Bundled hardware reduces the chance of a missing piece mid-job
- Useful when a faucet has rotated or loosened over time
Cons
- Very similar to the 113173 hardware listing, so comparing contents is necessary
- Will not resolve valve or cartridge leaks
Moen 1234 Duralast Handle Replacement Cartridge
2-handle cartridge, bathroom and kitchen compatibility, Duralast design, hot or cold replacement, repair part Moen 1234 Duralast Handle Replacement Cartridge
This cartridge is designed for two-handle Moen faucets, where a drip from the hot or cold side is the typical symptom. It is a different product type from the single-handle parts above, so check your faucet’s handle style before ordering. Many homeowners with a dripping spout on a two-handle faucet find the cartridge is the component to replace.
Key specs
- Part type: handle replacement cartridge
- Model reference: Moen 1234
- Application: two-handle bathroom and kitchen faucets, hot or cold side
Pros
- Clear fix for drips on a single side of a two-handle faucet
- Compatible with both bathroom and kitchen applications, as the listing states
- Replacing only the cartridge is less work than replacing the whole faucet
Cons
- Not suitable for single-handle kitchen faucets
- Owners often report that correct cartridge orientation matters, so note how the old one sits before removing it
Buying Guide
Choosing a kitchen Moen faucet repair part starts with diagnosis, not shopping. The symptom tells you which component is failing, and buying the wrong part is the most common reason repairs fail. Before ordering, identify whether your faucet is single-handle or two-handle, locate the model name stamped on the faucet body or in the Moen documentation, and decide whether the problem is a drip, a leak at the base, a loose faucet or a stiff handle.
Selection criteria
- Compatibility: match the part to your faucet’s handle style and Moen model family.
- Scope of repair: decide whether you need a cartridge, a mechanism, mounting hardware or seals.
- Contents: confirm what is in the package, since similar listings often differ.
Important features and specs to check
- Handle style: single-handle versus two-handle.
- Reference numbers printed on the old part or in Moen’s parts documentation.
- Whether the kit includes mounting plates, nuts or only the valve mechanism.
Choosing by need
- Stiff or drifting single handle: a mechanism kit.
- Loose faucet or base leak: mounting hardware.
- Drip on one side of a two-handle faucet: a replacement cartridge.
Things to watch out for
- Shutting off the water supply before removing any part, and relieving pressure by running the faucet.
- Photographing the assembly before disassembly to remember orientation.
- Not forcing corroded parts; penetrating lubricant and patience usually work better.
If you are unsure which component is failing, or if the leak involves the supply lines or the sink drain, consult a licensed plumber rather than guessing.
FAQ
How do I know which Moen part I need?
Start by identifying whether your faucet has one handle or two, then match the symptom to a component. Drips from the spout on a single-handle faucet often point to the mechanism or cartridge, while a loose faucet points to mounting hardware. Note the model reference on the old part or in Moen’s documentation before buying.
Can I repair a Moen kitchen faucet without removing it?
Some access is possible from under the sink, but most cartridge and mechanism replacements require removing the handle and sometimes the faucet body. Expect to disconnect the supply lines and shut off the water first.
Why does my Moen faucet still drip after replacing the cartridge?
Owners often report that the new cartridge was not seated fully or was installed in the wrong orientation. Check the seating and the O-rings, and make sure the cartridge matches your faucet’s model.
Is a single-handle mechanism the same as a cartridge?
Not always. The mechanism covers the handle assembly and its internal controls, while a cartridge is a specific valve component. Read each listing’s description to confirm which one it replaces.
Do I need the mounting hardware if the faucet is only dripping?
Usually not. Mounting hardware addresses looseness and base leaks. If the drip is coming from the spout or handle, focus on the valve components instead.
When should I call a plumber?
If you cannot identify the failing part, if the leak involves supply lines or the drain, or if the faucet is corroded and will not release, consult a licensed plumber. Repairs near water supply connections carry a risk of flooding if done incorrectly.
Can a cartridge from a bathroom faucet be used in the kitchen?
Only if the listing explicitly states compatibility with your faucet’s model. Some two-handle cartridges are marketed for both bathroom and kitchen use, but single-handle kitchen faucets use different mechanisms.
Conclusion
For a single-handle kitchen Moen faucet with a stiff or leaking handle, the mechanism kit is the most direct repair. If the faucet wobbles or leaks at the base, the mounting hardware kits address the structure rather than the valve. For a two-handle faucet dripping from one side, the replacement cartridge is the component to replace. Match the part to the symptom, confirm the model reference, and when in doubt, seek a licensed plumber’s advice before committing to a repair.
Related reading
- Bathroom Moen Faucet Repair: Lever Handle Kit Review (2026)
- 8 Best Delta Kitchen Faucet Cartridges for Easy Repairs in 2026
- 7 Best Delta Kitchen Faucet Parts (2026): Repair-Ready Picks
- Moen vs Delta Kitchen Faucet (2026): Which Is Better for Everyday Use?
- Moen or Delta Kitchen Faucet (2026): Which Is Better for Everyday Use?
- Moen Kitchen Faucet Replacement Parts: Find and Install the Right One
