Updated November 2026

A kitchen faucet replacement sprayer is often the fastest way to restore a worn or leaking spray head without swapping the whole faucet. The picks below were chosen by thread size, spray modes, universal fit claims, material and common owner feedback patterns, so you can match a head to your existing hose and sink setup.

At a glance

Our top picks at a glance

  1. 1Universal Fit Sink Spray Attachment, Kitchen Side Sprayer HeadTOP CHOICEBest overallUniversal Fit Sink Spray Attachment, Kitchen Side Sprayer HeadView on Amazon
  2. 2NSF/ANSI/CAN 372 Certified 2 Function Spray Nozzle Hibbent Pull Out Sink Sprayer HeadTOP CHOICEBest for certified water systemsNSF/ANSI/CAN 372 Certified 2 Function Spray Nozzle Hibbent Pull Out Sink Sprayer HeadView on Amazon
  3. 3Kitchen Sink Sprayer Replacement Head, Side Spray AttachmentTOP CHOICEBest for side-spray setupsKitchen Sink Sprayer Replacement Head, Side Spray AttachmentView on Amazon
  4. 4Pull Out Sink Sprayer Replacement Nozzle, Brushed NickelBest for brushed nickel finishesPull Out Sink Sprayer Replacement Nozzle, Brushed NickelView on Amazon
  5. 5ABS Plastic Pull Down Nozzle, Stream and Spray ModeBest for budget repairsABS Plastic Pull Down Nozzle, Stream and Spray ModeView on Amazon

Our Top Picks

Product Best for Key feature
Universal Fit Sink Spray Attachment Broad compatibility Universal fit, chrome finish
Hibbent Pull Out Sink Sprayer Head Certified water systems NSF/ANSI/CAN 372, two functions
Kitchen Sink Sprayer Replacement Head Side-spray setups Side spray attachment, easy install
Pull Out Sink Sprayer Replacement Nozzle Brushed nickel finishes G1/2 connector, brushed nickel
ABS Plastic Pull Down Nozzle Budget repairs Stream and spray modes

Universal Fit Sink Spray Attachment, Kitchen Side Sprayer Head

Universal Fit Sink Spray Attachment, Kitchen Side Sprayer Head, Pull Out Spray Head, Faucet Sprayer Replacement, Chrome

Universal Fit Sink Spray Attachment, Kitchen Side Sprayer Head, Pull Out Spray Head, Faucet Sprayer Replacement, Chrome

View on Amazon

Best for: Broad compatibility

This head suits homeowners who are not sure of their faucet brand and want a chrome replacement that is marketed as universal fit.

Pros:

  • Marketed as universal fit across common sprayer hoses
  • Chrome finish matches most kitchen hardware

Cons:

  • Fit claims should be checked against your hose before ordering

View on Amazon

NSF/ANSI/CAN 372 Certified 2 Function Spray Nozzle Hibbent Pull Out Sink Sprayer Head

NSF/ANSI/CAN 372 Certified 2 Function Spray Nozzle, G1/2 or 13/16'' Thread Faucet Head for Kitchen Tap Sprayer Spout, Chrome Hibbent Pull Out Sink Sprayer Head Replacement, Kitchen Sink Faucet Head

NSF/ANSI/CAN 372 Certified 2 Function Spray Nozzle, G1/2 or 13/16'' Thread Faucet Head for Kitchen Tap Sprayer Spout, Chrome Hibbent Pull Out Sink Sprayer Head Replacement, Kitchen Sink Faucet Head

View on Amazon

Best for: Certified water systems

This option fits buyers who want a sprayer head whose listing references NSF/ANSI/CAN 372 lead-free compliance and offers two spray functions.

Pros:

  • Listing cites NSF/ANSI/CAN 372 certification
  • Offers two spray functions in a G1/2 or 13/16-inch thread option

Cons:

  • Thread size must be confirmed before purchase

View on Amazon

Kitchen Sink Sprayer Replacement Head, Side Spray Attachment

Kitchen Sink Sprayer Replacement Head, Side Spray Attachment for Faucet, Pull Out Spray Nozzle Head, Easy Install, Chrome

Kitchen Sink Sprayer Replacement Head, Side Spray Attachment for Faucet, Pull Out Spray Nozzle Head, Easy Install, Chrome

View on Amazon

Best for: Side-spray setups

It is aimed at sinks with a separate side sprayer or a pull-down head that needs a simple swap.

Pros:

  • Designed for straightforward, tool-light installation
  • Side spray attachment suits secondary rinse tasks

Cons:

  • Owners often report that fit depends on the specific hose connector

View on Amazon

Pull Out Sink Sprayer Replacement Nozzle, Brushed Nickel

Pull Out Sink Sprayer Replacement Nozzle, Kitchen Faucet Head Hose Spray Tap Spout Only for G1/2(0.8inch)Connector Pull Down Kitchen Faucet Sprayer Head Replacement Part, Brushed Nickel

Pull Out Sink Sprayer Replacement Nozzle, Kitchen Faucet Head Hose Spray Tap Spout Only for G1/2(0.8inch)Connector Pull Down Kitchen Faucet Sprayer Head Replacement Part, Brushed Nickel

View on Amazon

Best for: Brushed nickel finishes

This head is built for owners whose faucet already uses brushed nickel and who want a finish match.

Pros:

  • Brushed nickel finish matches common faucet styles
  • Listed for a G1/2 (0.8-inch) connector

Cons:

  • Connector size must be measured before ordering

View on Amazon

ABS Plastic Pull Down Nozzle, Stream and Spray Mode

ABS Plastic Pull Down Nozzle, G 1/2 or 13/16 Inch Male Thread, Stream and Spray Mode, Tested to NSF/ANSI/CAN 61 & 372 Angle Simple Kitchen Faucet Head Replacement, Sink Sprayer, Brushed Nickel

ABS Plastic Pull Down Nozzle, G 1/2 or 13/16 Inch Male Thread, Stream and Spray Mode, Tested to NSF/ANSI/CAN 61 & 372 Angle Simple Kitchen Faucet Head Replacement, Sink Sprayer, Brushed Nickel

View on Amazon

Best for: Budget repairs

It suits homeowners who need a lightweight, easy-to-swap head with both stream and spray modes for routine repairs.

Pros:

  • Stream and spray modes in one head
  • Lightweight ABS construction

Cons:

  • Plastic construction may feel less solid than metal heads

View on Amazon

Buying Guide

Thread Size

Most sprayer heads use either G1/2 or 13/16-inch threads. Measure the male thread on your existing hose before you order, since a mismatch means the head will not seat.

Spray Modes

Check whether you need a stream, a spray, or both. Dual-function heads cover rinsing and filling, while single-mode heads are often simpler and more durable.

Finish and Material

Match the finish to your faucet body so the new head does not look out of place. ABS plastic is lighter, while metal heads feel heavier and more solid in the hand.

Certification

If your household uses a certified water system, look for NSF/ANSI listings in the product description. Confirm the listing matches the standard your local code requires.

Good picks for this: Hibbent Pull Out Sink Sprayer Head and Universal Fit Sink Spray Attachment

FAQ

Can I replace only the sprayer head without changing the whole faucet?

Yes, in most cases. As long as the hose thread matches the new head, you can swap only the spray head and keep the existing faucet body.

How do I know which thread size I need?

Unscrew the old head and measure the male thread diameter at the hose end. Common sizes are G1/2 and 13/16 inch, and product listings specify which one they fit.

Miles Sinclair

About Miles Sinclair

Miles Sinclair is part of our editorial team and reviews and edits our kitchen faucets & sinks guides, checking product details against manufacturer specifications and owner feedback.