Updated November 2026

To repair an exterior faucet, you shut off the water supply, identify whether the leak comes from the handle, the spout or the connection to the hose, and replace the worn part that’s causing it. Most outdoor faucet problems come down to a rubber washer, a packing nut or a failed stem, and each takes under an hour to fix with basic hand tools. The steps below cover the most common repairs for a standard compression-style outdoor faucet, often called a sillcock or hose bibb.

Shut Off the Water and Diagnose the Leak

Before touching anything, turn off the water supply. Look for a dedicated shutoff valve inside the house, usually near where the outdoor pipe enters the wall, in a basement, crawl space or utility room. Then open the outdoor faucet to drain residual water and release pressure.

Shopping for one? See our guide: Repair Exterior Faucet Leak: 6 Best Kits and Parts Compared (2026).

Next, work out where the leak is coming from. A drip from the spout while the faucet is off usually points to a worn washer or seat. Water leaking around the handle stem means the packing nut or packing is loose or dried out. Water coming from the hose connection suggests a bad hose washer or a cracked hose end.

Replace the Washer or Packing

For a washer leak, remove the handle screw, unscrew the packing nut and pull out the stem assembly. At the end of the stem, a rubber washer is held by a brass screw. Remove it, take the old washer to the hardware store to match the size, and install the new one with the same orientation. Some stems also have an O-ring or packing string; replace those if they look cracked or flattened.

If the leak only occurs when the handle is turned, tighten the packing nut a quarter turn at a time. If that doesn’t stop it, replace the packing washer or add new packing material. Avoid overtightening, which can crack the handle or make it hard to turn.

Reassemble, Test and Fix the Seat If Needed

  1. Reinstall the stem assembly and hand-tighten the packing nut.
  2. Replace the handle, tighten the handle screw and turn the water supply back on slowly.
  3. Open the faucet fully, then close it. Watch for drips at the spout and around the handle.
  4. If the spout still drips after a new washer, the valve seat inside the body may be pitted. Use a seat wrench to remove and resurface or replace it.

Check the hose connection too. A cracked or flattened rubber washer at the hose end is a cheap fix and often gets overlooked.

Common Mistakes to Avoid

  • Skipping the shutoff check. Confirm the water is off by opening the faucet before disassembly.
  • Using the wrong washer size. A washer that’s too small or too thick won’t seal and will leak again within weeks.
  • Overtightening the packing nut, which can damage the stem threads.
  • Forgetting to drain the line. Freezing weather can leave water trapped in the pipe and cause a burst later.
  • Ignoring a frost-free design. Some outdoor faucets have a long stem that sits inside the wall; these need a different approach and may require professional help.
  • Adjustable pliers: helpful for gripping the packing nut without scratching the finish. View on Amazon
  • Replacement faucet washer assortment: lets you match the right size quickly if you’re not sure which one fits your faucet. View on Amazon
  • Seat wrench set: needed if the valve seat has to be removed for resurfacing or replacement. View on Amazon

FAQ

Can I repair an outdoor faucet without turning off the whole house water?

Often yes, if the outdoor line has its own shutoff valve. If it doesn’t, you’ll need to shut off the main supply before starting the repair.

How do I know if the stem or the washer is the problem?

A dripping spout with the handle closed usually points to the washer or seat. Leaking around the handle when the faucet is open points to the packing or stem.

When should I call a plumber?

If the faucet leaks from inside the wall, the pipe is cracked, or the shutoff valve won’t close, stop and consult a licensed plumber rather than forcing the repair.

Conclusion

Most exterior faucet leaks come down to a worn washer, a loose packing nut or a damaged seat, and each can be fixed with basic tools. Shut off the water, identify the leak source, replace the worn part and test before you walk away. A few minutes of careful work now can prevent water damage and wasted water later in the season.

Caleb Morgan

About Caleb Morgan

Caleb Morgan is part of our editorial team and reviews and edits our kitchen faucets & sinks guides, checking product details against manufacturer specifications and owner feedback.