Updated November 2026

Delta faucet cartridge identification comes down to finding the model number, the cartridge type and the part code stamped on or near the valve. Once you have those three details, you can order a matching replacement without guessing. This guide shows you where to look and what the markings mean.

Why Identifying Your Delta Cartridge Matters

Delta uses several cartridge designs across its kitchen and bath lines, and they are not interchangeable. A cartridge that fits a single-handle kitchen faucet may not seat correctly in a tub or shower valve. Ordering the wrong part wastes time and often leads to a second trip to the store. Owners frequently report that the old cartridge looked similar to the new one, yet the stem height or spline count was different.

Shopping for one? See our guide: Delta Faucet Valve Cartridge Review: Features and Performance.

Step-by-Step Cartridge Identification

Step 1: Check the Faucet Model Number

Start with the faucet itself. Delta typically places a model number on the underside of the spout, on the supply lines or on the installation instructions packed with the faucet. Write it down exactly, including any letter suffixes. If the model number is missing, move on to the cartridge itself.

Step 2: Read the Markings on the Cartridge

Remove the cartridge (see the removal guide linked below) and examine the top and sides. Most Delta cartridges carry a part number, often beginning with “RP” followed by several digits, plus a flow or temperature marking. Clean away mineral buildup with a soft brush so the text is legible.

Step 3: Count and Measure Key Features

If the markings are worn, measure the cartridge. Note the overall height, the diameter of the base and the number of splines (the ridges that engage the handle). Stem height and spline count are the two features most likely to differ between otherwise similar cartridges.

Step 4: Confirm the Handle Type

Single-handle faucets use a cartridge that controls both flow and temperature. Two-handle faucets use separate valve stems, which require a different part entirely. Look at how the handle moves: a single lever that rotates and lifts indicates a single-handle cartridge.

Quick Reference Checklist

  1. Faucet model number (from spout underside or manual)
  2. Cartridge part number (RP series or similar stamp)
  3. Overall height in millimeters or inches
  4. Base diameter and spline count
  5. Handle type: single-handle or two-handle
  6. Photo of the cartridge taken from several angles

Matching the Cartridge to Your Faucet Type

Use the table below as a starting point when you compare what you have against replacement options.

Faucet Type What to Check First Common Mismatch Risk
Single-handle kitchen Part number and stem height Similar-looking cartridges with different heights
Single-handle bath or shower Spline count and base diameter Tub cartridges sometimes mistaken for kitchen parts
Two-handle valve Stem type and handle connection Ordering a single-handle cartridge by mistake

For a full removal walkthrough, see Replacing Kitchen Faucet Cartridge: A Step-by-Step Guide for Beginners. If you are working on a tub valve, Delta Bathtub Faucet Cartridge: How to Replace One in 6 Steps covers the differences in detail.

Common Mistakes to Avoid

  • Ordering by faucet name alone, since one product line can use more than one cartridge.
  • Assuming a cartridge matches because it looks the same from the top.
  • Skipping the part number stamp because it is covered in mineral deposits.
  • Measuring the wrong end of the cartridge, which changes the stem height reading.
  • Forgetting to shut off the water supply before removing the old part.

A few inexpensive tools make identification much easier.

  • Digital caliper: Gives precise height and diameter readings, which matter when two cartridges look alike. View on Amazon
  • Soft-bristle brush set: Lets you clean mineral buildup off the cartridge without scratching the part number. View on Amazon
  • Magnifying glass with light: Helps read small stamped codes on worn or dark cartridges. View on Amazon

FAQ

Can I use a cartridge from a different Delta faucet line?

Sometimes, but not reliably. Matching part numbers and measurements is the only dependable way to confirm compatibility. If the numbers do not match exactly, do not force the fit.

What if the part number is completely worn off?

Measure the height, base diameter and spline count, then compare those against Delta’s published parts information. Taking clear photos before you buy helps a parts specialist confirm the match.

Do I need to know the cartridge type to replace it?

Yes. Installing the wrong cartridge type can cause leaks, poor temperature control or a handle that will not seat. If you are unsure, consult a licensed plumber before making the swap.

Conclusion

Delta faucet cartridge identification is straightforward once you know where to look: the model number, the stamped part code and the physical measurements. Gather those details before ordering, and you will avoid most mismatches. Keep a photo of the cartridge on your phone so future repairs go faster.

Caleb Morgan

About Caleb Morgan

Caleb Morgan is part of our editorial team and reviews and edits our kitchen faucets & sinks guides, checking product details against manufacturer specifications and owner feedback.