Updated November 2026
The cost to repair a leaky faucet is usually modest, because most drips come from a worn washer, O-ring, cartridge or valve seat that is inexpensive to replace. The biggest variables are whether you do the work yourself and whether the faucet is a simple compression model or a newer cartridge design that needs more parts and time.
Why Leaky Faucet Repair Costs Vary
A drip almost always traces back to one worn component. In older compression faucets, that is a rubber washer pressed against a metal valve seat. In cartridge faucets, a plastic or ceramic cartridge controls flow and can wear or crack. Ball faucets rely on rubber seals and springs. Identifying the faucet type is the first step, because it determines whether you need a simple gasket or a full cartridge replacement.
Shopping for one? See our guide: 5 Best Leaky Faucet Repair Bathtub Kits for Common Leaks and Drips (2026).
Labor is the other major factor. A plumber typically charges a service call plus time on the job, so a basic washer swap can end up costing far more than the parts. A homeowner who spends an hour with a screwdriver and an adjustable wrench avoids that charge entirely. Replacing a cartridge takes longer and is more fiddly, but the part itself is still inexpensive.
Location and access also matter. A kitchen faucet with plenty of room under the sink is easier to service than a tub spout with a tight access panel, and a faucet with corroded shutoff valves may need those replaced before you can work on it safely.
How to Keep Repair Costs Down
Start by diagnosing the leak accurately. A drip from the spout usually points to a cartridge, valve seat or washer. Leaking from the base of the handle often means a worn O-ring or packing nut. Leaking at the aerator is a different and much simpler problem. Correct diagnosis prevents buying parts you do not need.
- Turn off the water supply under the sink, then open the faucet to drain residual pressure.
- Identify the faucet type: compression, cartridge, ball or disc. Note the brand and take a photo of the parts before disassembly.
- Remove the handle, then inspect the washer, O-ring or cartridge for cracks, grit or flattening.
- Take the worn part to a hardware store and match it exactly, or buy a kit labeled for your brand.
- Reassemble, turn the water back on slowly, and test for drips before tightening everything fully.
Keep a few tips in mind. Use a silicone-based plumber’s grease on O-rings so they seat without tearing. Do not overtighten the packing nut or handle screw, since that can crack a plastic part and turn a small drip into a bigger repair. If the valve seat is pitted, a seat wrench or replacement seat is often needed, because a new washer will not seal properly against a damaged surface.
If shutoff valves under the sink are stiff or leak when you turn them, consult a licensed plumber before forcing them, since a failed valve can flood the cabinet.
What We’d Use
For compression faucets, a universal assortment of washers and O-rings covers many common sizes and saves a trip to the store. View on Amazon
For cartridge faucets, buy a replacement cartridge matched to your brand, since mismatched cartridges rarely seat correctly. View on Amazon
FAQ
Is it cheaper to fix a leaky faucet myself?
In most cases, yes. The parts are inexpensive, and doing the work yourself removes the service call and labor charge. The main risk is making a mistake on a stuck valve or damaged shutoff, which is when calling a professional makes sense.
How long does a typical faucet repair take?
A washer or O-ring replacement often takes under an hour once you have the right part. Cartridge replacement can take longer, especially if corroded parts need to be freed up.
When should I replace the whole faucet instead of repairing it?
If the faucet is very old, the finish is failing, parts are no longer available for your model, or multiple components are leaking, replacement may be more practical than repeated repairs. For step-by-step guidance on the most common fixes, see Replace Kitchen Faucet Cartridge: Step-by-Step Repair Guide and Repair Kit for Faucet: A Step-by-Step Guide to Fixing Drips and Leaks.
