Updated November 2026
A delta faucet parts catalog lists every component Delta makes for a given faucet model, along with the part numbers you need to order a replacement. Used correctly, it lets you match a worn cartridge, spout or handle to the exact piece in minutes instead of guessing. This guide shows you how to find your faucet’s model and finish, locate the right exploded diagram and confirm the part number before you buy.
Step 1: Identify Your Faucet Model and Series
Every catalog entry is tied to a specific model, so start by confirming what you have. Look for the model number stamped or printed on the faucet body, usually under the sink on the supply lines, on the base of the spout or on the packaging if you still have it. Delta model numbers typically combine a series name and a numeric code, and the finish (chrome, brushed nickel, matte black and so on) is often part of the identifier. Write both down before you search.
Shopping for one? See our guide: 6 Best Delta Faucet Replacement Parts (2026): Expert Picks.
Step 2: Locate the Exploded Diagram
Once you have the model number, search the catalog by that number rather than by the faucet’s marketing name. Delta’s exploded diagrams show each component numbered in order, from the escutcheon and handle down to the cartridge, O-rings and stem. Match the part you need to its callout number, then read the description beside it. If the diagram shows several similar parts, compare the drawings closely, since a single model may use different cartridges depending on whether it is a single-handle or widespread design.
Step 3: Confirm the Part Number Before Ordering
Each part in the catalog carries its own part number, and that number is what matters when you buy. Compare it with the number printed on your old part if it is still legible, and check that the finish or handle style matches. Parts for older models may have been replaced by newer equivalents, so note any superseded numbers listed in the catalog. For guidance on tracking down retired components, see Discontinued Delta Faucet Parts: How to Find and Replace Them (2026).
Information to Have Ready
- Full model number and finish
- Approximate age of the faucet or original installation date
- The failing part’s name (cartridge, spout, aerator, handle)
- A photo of the old part, including any markings
Step 4: Check Compatibility Against Your Installed Parts
Before buying, verify that the part fits the faucet you actually have, not just the one printed on the box. A cartridge is often the most common mismatch, since different Delta series use different cartridge types. Our overview of Delta Faucet Repair Parts: Find, Identify and Install the Right Ones walks through how to confirm a match. Comparing your old part against the diagram is the most reliable check.
| What You Find | What It Means |
|---|---|
| Part number matches your old part exactly | Order it as listed |
| Part is marked superseded | Order the listed replacement number |
| Diagram shows several similar cartridges | Compare shape and length against your old part |
| Model number is missing or unreadable | Use the spout or handle shape to narrow the series |
Common Mistakes to Avoid
- Searching by faucet nickname instead of the exact model number.
- Ignoring the finish, which can change the escutcheon or handle part.
- Assuming a part from a similar-looking model will fit.
- Skipping the old-part comparison and ordering from memory.
- Forgetting that some series require a full cartridge rather than a seal kit.
Recommended Gear
A few basic tools make the catalog step easier. A small flashlight helps you read model numbers under the sink, where they are often printed in low-contrast text. A plastic cartridge puller prevents scratches while you remove the old part for comparison. And a penlight or magnifier is useful for reading small part numbers stamped on metal components.
- A compact LED flashlight for reading model numbers under the sink. View on Amazon
- A faucet cartridge puller to remove parts without scratching finishes. View on Amazon
- A magnifier for reading small stamped part numbers. View on Amazon
FAQ
Where is the model number on a Delta faucet?
It is usually printed or stamped on the faucet body, the base of the spout or the supply lines under the sink. Check the packaging or installation sheet if you still have them.
What if my part number is no longer listed?
Look for a superseded or replacement number in the catalog entry, or compare the old part’s shape and dimensions against current diagrams. A professional plumber or Delta’s customer support can confirm a match if you are unsure.
Can I use the catalog for other faucet brands?
No. The catalog only lists Delta components, and part numbers are not interchangeable with other manufacturers’ products.
Conclusion
Using a delta faucet parts catalog comes down to three things: confirm the model and finish, match the part on the exploded diagram and verify the part number against your old component. Taking a few minutes for this step prevents the frustration of ordering the wrong cartridge or spout. When in doubt about a complex repair, consult a licensed plumber.
