By Caleb MorganUpdated November 2026
If you are looking at a delta faucet stem replacement kit for a two-handle Delta faucet that drips, this two-pack from the RP24096 cartridge family is aimed squarely at that repair. It bundles a cartridge with a 1/4 turn stop, seats and springs, and is sold as a fit for Delta two-handle faucets. It suits homeowners who have already identified the worn part and want a matched set of internal components in one order. It is a poor choice if your faucet is a single-handle model, a Delta with a different internal design, or a fixture where the leak comes from the spout, aerator, or a loose handle rather than the valve body. Confirm your faucet’s model number before you buy.
RP24096 Cartridge Repair with RP24097 1/4 Turn Stop and RP4993 Seats Springs, 2 Pack RP25513 Faucet Stem Replacement, Fits with Delta Two Handle Faucet
Product Overview
This listing is a repair set rather than a complete faucet. Its title identifies three core parts: the RP24096 cartridge repair piece, the RP24097 1/4 turn stop, and the RP4993 seats and springs. It also carries the RP25513 faucet stem designation and states it fits Delta two-handle faucets. The two-pack format suggests you may be able to repair two fixtures, or keep a spare on hand, which is useful in a bathroom or kitchen where you may want to address a second faucet without a second trip to the store.
A stem-style repair is different from swapping a whole cartridge in many single-handle designs. In a two-handle valve, each handle typically controls its own stem, and the stem’s rubber washer and seat are the usual failure points. When water drips from the spout even with the handle fully closed, worn seats or a deteriorated stem are the most common cause. That makes a stem kit a sensible first purchase for a drip, but only if the internal parts match your valve.
Before you order, check the old stem or the stamping on the valve body. Delta’s two-handle lines have changed over the decades, and parts that look similar can differ in height, thread, or stem length. The listing’s own compatibility claim is the starting point, but your physical part is the final authority.
Key Features & Specifications
The table below lists only what the product name states. Dimensions, materials, and warranty terms are not confirmed in the listing title, so they are omitted rather than guessed.
| Feature | Detail (per listing name) |
|---|---|
| Primary component | RP24096 cartridge repair piece |
| Stop component | RP24097 1/4 turn stop |
| Seat and spring component | RP4993 seats and springs |
| Stem designation | RP25513 faucet stem replacement |
| Faucet type | Delta two-handle faucet |
| Quantity | 2 pack |
Pros & Cons
Pros
- Bundles the cartridge, stop, and seat-and-spring parts in one order, so you do not have to match separate components.
- Two-pack format gives you a spare or enough for a second valve.
- Named explicitly for Delta two-handle faucets, which narrows the compatibility question.
- Targets the most common cause of a two-handle drip: worn seats and internal stem parts.
Cons
- Compatibility depends on matching your specific Delta valve; the listing does not list every model year or series.
- Not suitable for single-handle faucets or non-Delta brands.
- A stem kit does not fix leaks from the spout body, aerator, or handle.
- Installation requires shutting off water and disassembling the valve, which can be difficult on corroded fittings.
Performance Analysis
Because this is a parts kit, its performance is measured by whether it stops the drip and restores normal flow. Owner feedback for repair kits of this type commonly follows a predictable pattern. When the part numbers match the faucet, people usually report that the drip stops once the seats and springs are replaced and the stem is seated correctly. When the drip continues, the most frequent explanation is a mismatch in stem height or thread, or a worn valve seat inside the faucet body that a new stem cannot fix.
Installation is where most results are decided. Owners often note that a careful sequence matters: shut off the supply valves, relieve pressure by opening the faucet, remove the handle and bonnet nut, then extract the old stem with a stem puller or a pair of channel-lock pliers wrapped in a cloth. Lubricating new O-rings with plumber’s grease reduces the chance of a squeal or stiff handle. Overtightening the bonnet nut is a common mistake that can crack a plastic handle or distort the seat.
Durability is hard to judge from a listing alone. Stem repairs generally last as long as the rubber and brass parts they replace, and hard water accelerates wear. Owners in hard-water areas often report that a stem kit lasts a few years rather than indefinitely, and that periodic greasing extends service life. Set realistic expectations: a stem kit restores a faucet, but the valve seat and body are still aging components.
Who Should Buy This Product?
This kit suits a homeowner who has confirmed they own a Delta two-handle faucet, has seen a steady drip from the spout, and is comfortable turning off water and taking apart a valve with basic hand tools. It also suits anyone managing more than one Delta fixture who wants spare internal parts on hand.
Skip it if your faucet has a single lever, if the leak is at the base of the spout or under the handle, or if you are not sure which Delta series you have. In those cases, a complete cartridge or a model-specific part will save time. A licensed plumber can identify the correct part quickly, which is worth the call if the valve is seized or the fittings are badly corroded.
Buying Guide
Start by identifying your faucet. Remove a handle cap, look for a Delta stamping on the body, and note whether the faucet has one handle or two. Compare the stamping and the stem length against the listing. If you cannot read a model number, photograph the valve and take it to a supply store.
Next, decide between a stem kit and a full cartridge. A stem kit with seats and springs is the right call when the stem and seats are the failure point. A full cartridge is the better choice when the valve body is sound but the internal cartridge has failed, which is typical of single-handle designs and some Delta lines. Replacing the wrong component wastes time and money, so match the repair to the symptom.
Consider these well-known alternatives if this kit does not match your valve:
-
A dedicated repair kit with a matched cartridge, seat, spring, and turn stop, sold as a four-pack. It suits buyers who want a larger spare supply for multiple valves.
Repair Kit with RP24096 Cartridge, RP4993 Seat and Spring, RP24097 Turn Stop 1/4 RP25513 Faucet Stem Replacement for Delta 2 Handle Faucet Cartridge, 4 Pack
-
A Delta-branded replacement parts assortment, which can be useful when you need an OEM-style component and want to stay within one manufacturer’s catalog.
DELTA FAUCET RP73000 Delta Plumbing Replacement Parts, Chrome
Before you order any part, read the related guides for your specific fixture, such as Replace Delta Faucet Stem: 7 Best Repair Kits Compared (2026) for a broader comparison of stem kits, and Delta Bath Faucet Cartridge: Step-by-Step Replacement Guide if your leak is in a tub valve. For kitchen fixtures, 6 Best Delta Replacement Parts Kitchen Faucet Picks for Repairs (2026) covers related components. If the spout is dripping from the outlet rather than the handle, Delta Faucet Screen Replacement: 7 Best Aerator Screens Compared may point you to a simpler fix.
FAQ
Will this kit fix a faucet that drips from the spout when the handle is off?
It can, if the drip is caused by worn seats or a damaged stem inside a Delta two-handle valve. Shut off the supply, remove the stem, and inspect the seat for pitting. If the seat is badly damaged, a new stem alone may not stop the drip, and the valve seat may need replacement.
How do I know if my faucet is a two-handle Delta?
Look for two separate handles, one each for hot and cold. Check for a Delta stamp on the valve body or under the handle cap. If there is no clear marking, a photo of the valve taken to a hardware store usually gets an answer quickly.
Do I need to turn off the main water supply?
Turning off the faucet’s dedicated supply valves under the sink is usually enough for a kitchen faucet. For a tub valve, you may need to shut off the main or the individual supply lines. Open the faucet after shutoff to relieve remaining pressure before disassembly.
What tools do I need for a stem replacement?
Most stem jobs require an adjustable wrench, a stem puller or channel-lock pliers wrapped in cloth, a screwdriver for the handle screw, and plumber’s grease. A seat wrench is needed if the seats themselves are being replaced.
Why does my handle feel stiff after I install the new stem?
Stiffness is often caused by insufficient lubrication, a misaligned stem, or an overtightened bonnet nut. Back the nut off slightly, check that the stem seats evenly, and apply fresh grease to the O-rings before reassembling.
Can I use this kit on a single-handle faucet?
No. This kit is named for Delta two-handle faucets. Single-handle Delta faucets use a cartridge design that requires a different part, so confirm the model before ordering.
When should I call a plumber instead of replacing the stem myself?
Call a plumber if the valve is seized, the fittings are corroded, the faucet is mounted in a hard-to-reach location, or the drip continues after a correct stem replacement. Those situations often point to a damaged valve body or seat that requires professional work.
Final Verdict
A sensible choice for a Delta two-handle drip, if the part numbers match your valve
This kit is a practical, focused repair set for owners of Delta two-handle faucets whose drip traces back to worn internal parts. Its bundled components and two-pack format add value for multi-fixture households. The main risk is compatibility: confirm your valve before ordering, and consider a broader kit or a plumber’s help if the leak persists after a correct installation.
Related reading
- Delta Bathtub Faucet Replacement Parts: Find and Install the Right Ones
- Delta Bathroom Tub Faucet Parts: 8 Best Replacements Compared
About Caleb Morgan
Caleb Morgan is part of our editorial team and reviews and edits our kitchen faucets & sinks guides, checking product details against manufacturer specifications and owner feedback.
