By Miles SinclairUpdated November 2026
If you need to fix a Moen kitchen faucet, the right replacement part matters more than almost anything else. A leak, a stiff handle or a weak spray usually traces back to one component: the cartridge, the mounting hardware or the pulldown spray head. This list compares five products from the Amazon listings we reviewed, weighing compatibility with Moen models, the parts each kit actually includes, and the patterns owners tend to report after installation.
Our top picks at a glance
- 1
TOP CHOICEBest overallMoen Faucet Repair Kit 93980 – Replacement Single Handle Mechanism for Kitchen PartsView on Amazon - 2
TOP CHOICEBest for mounting problemsMoen Kitchen Faucet Parts Mounting Kit 113173 – Fixing Plate and Nut HardwareView on Amazon - 3
TOP CHOICEBest for pulldown spray failuresMoen Arbor Classic Stainless Pulldown Spray Head 131380CSLView on Amazon - 4
Best for double-handle faucetsMoen 1224 Replacement Faucet Cartridge KitView on Amazon - 5
Best budget pickMounting Kit for Moen Kitchen Faucet Parts 113173View on Amazon
Our Top Picks
Before you buy any part, it helps to know what kind of failure you are dealing with. A dripping spout that keeps running after you shut the handle off usually means a worn cartridge or valve. A wobbling faucet body or a loose base points to mounting hardware. A spray head that won’t retract or sprays unevenly points to the hose or head itself. The table below summarizes where each product fits.
Quick Comparison
| Product | Best for | Key feature |
|---|---|---|
| Moen Faucet Repair Kit 93980 | General leaks and stiff single-handle operation | Replacement single-handle mechanism |
| Moen Kitchen Faucet Parts Mounting Kit 113173 | Loose or wobbly faucets | Fixing plate and mounting nut hardware |
| Moen Arbor Classic Stainless Pulldown Spray Head 131380CSL | Failed or weak pulldown sprayers | Replacement spray head in Classic Stainless finish |
| Moen 1224 Replacement Faucet Cartridge Kit | Double-handle faucets with drips | Cartridge sized for most double-handle Moen faucets |
| Mounting Kit for Moen Kitchen Faucet Parts 113173 | Shoppers wanting a lower-cost mounting fix | Fixing plate and nut kit for Moen mounts |
Moen Faucet Repair Kit 93980 – Replacement Single Handle Mechanism for Kitchen Parts
Moen Faucet Repair Kit 93980 – Replacement Single Handle Mechanism for Kitchen Parts
Best for: Repairing leaks and stiff handles on single-handle kitchen faucets.
This is the most direct fix for a single-handle Moen kitchen faucet that drips from the spout or feels hard to move. It is aimed at homeowners who have identified the internal mechanism as the source of the problem and want a replacement in one purchase.
Key specs:
- Replacement single-handle mechanism for Moen kitchen faucets
- Designed as a repair kit for kitchen faucet parts
Pros:
- Addresses the most common cause of single-handle drips
- Restores smooth handle movement when the internal parts are worn
- Avoids replacing the entire faucet
Cons:
- You must confirm the mechanism matches your specific Moen model before installing
- Installation requires shutting off supply lines and removing the handle
Bottom line: The best starting point for most single-handle Moen repairs. Check your model number against the listing before ordering.
Moen Kitchen Faucet Parts Mounting Kit 113173 – Fixing Plate and Nut Hardware
for Moen Kitchen Faucet Parts,Faucet Fixing Plate & Faucet Mounting Nut Hardware Kit 113173 Kitchen Faucet Repair Kit for Moen Mounting Kit
Best for: Tightening a loose faucet or replacing lost mounting hardware.
This kit suits homeowners whose faucet rocks side to side, sits crooked on the countertop or has missing mounting nuts after a previous repair. It is a low-risk purchase because it does not touch the water-control components.
Key specs:
- Includes faucet fixing plate and faucet mounting nut hardware
- Listed under Moen kitchen faucet repair part number 113173
Pros:
- Solves wobble and loose-base problems without disassembling the valve
- Inexpensive way to restore a secure installation
- Useful when hardware is missing from an older faucet
Cons:
- Does not fix leaks or handle operation
- Fit should be verified against your sink deck and existing hardware
Bottom line: Pick this if the faucet moves but still works. It is a hardware fix, not a valve fix.
Moen Arbor Classic Stainless Pulldown Spray Head 131380CSL
MoenGenuine replacement part, Arbor compatible, pulldown spray head, Classic Stainless finish, restores faucet performance 131380CSL Arbor Classic Stainless Pulldown Spray Head Replacement
Best for: Replacing a failed or weak pulldown spray head.
This is a genuine Moen replacement spray head for the Arbor series in Classic Stainless. It fits owners whose sprayer leaks at the head, sprays unevenly or no longer retracts smoothly into the faucet body.
Key specs:
- Replacement pulldown spray head, Arbor compatible
- Classic Stainless finish
- Moen part number 131380CSL
Pros:
- Genuine Moen part, matched to the Arbor design
- Finish matches existing Classic Stainless faucets
- Replaces only the sprayer, leaving the rest of the faucet intact
Cons:
- Only suitable for Arbor-compatible pulldown faucets
- Owners with other Moen lines should confirm compatibility first
Bottom line: The right choice for Arbor pulldown owners whose sprayer has failed but whose faucet body still works.
Moen 1224 Replacement Faucet Cartridge Kit
Moen 1224 Replacement Faucet Cartridge Kit Fits Most Double Handle Moen Faucets and Tub/Showers
Best for: Fixing drips on double-handle faucets.
This cartridge kit is listed for most double-handle Moen faucets and some tub and shower applications. It is intended for homeowners whose hot or cold side drips or whose handle has become hard to turn.
Key specs:
- Replacement faucet cartridge kit, Moen model 1224
- Listed as fitting most double-handle Moen faucets
Pros:
- Targets the most common cause of drips on double-handle faucets
- Cartridge swap is a contained repair with no sink-deck work
- Also listed for some tub and shower Moen faucets
Cons:
- “Most” double-handle faucets is not all; verify the cartridge number on your old one
- Replacing a cartridge requires removing the handle and retaining clip
Bottom line: A good match for double-handle Moen owners. Compare the old cartridge’s markings before ordering.
Mounting Kit for Moen Kitchen Faucet Parts 113173
Mounting Kit for Moen Kitchen Faucet Parts,Includes Faucet Fixing Plate & Faucet Mounting Nut Hardware Kit 113173 Kitchen Faucet Repair Kit for Moen
Best for: A budget-minded mounting fix for loose faucets.
This is a second mounting kit built around the same 113173 hardware set. It suits buyers who want a backup set or simply the lowest-cost route to securing a Moen faucet base.
Key specs:
- Includes faucet fixing plate and faucet mounting nut hardware
- Referenced to Moen kit 113173
Pros:
- Budget-friendly option for a simple hardware repair
- Same hardware reference as the primary mounting kit
- Useful as a spare set for future repairs
Cons:
- Overlaps closely with the other mounting kit, so compare listings carefully
- Does not address valve or spray problems
Bottom line: A sensible pick if you only need to tighten a faucet and want to spend as little as possible on the fix.
Buying Guide
Identify the Failure Before You Buy
Turn off the water supply under the sink and check what is actually failing. A drip from the spout points to a cartridge or valve. Water at the base or a wobbling body points to mounting hardware. Weak or leaking spray points to the hose or head. Buying the right category saves you from ordering two parts. For a deeper look at common causes, see How to Fix a Leaky Kitchen Faucet: 5 Steps for Most Models.
Good picks for this: Moen Faucet Repair Kit 93980, Moen Kitchen Faucet Parts Mounting Kit 113173
Confirm Your Model and Part Number
Moen uses many part numbers across its lines, and a part that fits one faucet may not fit another. Look for the model name or number stamped on the faucet body, under the sink or on the original packaging. Compare the old cartridge or spray head directly with the listing photos. The Moen Kitchen Faucet Parts Diagram: How to Find and Use Yours guide explains how to read the diagram.
Good picks for this: Moen 1224 Replacement Faucet Cartridge Kit, Moen Arbor Classic Stainless Pulldown Spray Head 131380CSL
Single-Handle vs. Double-Handle Compatibility
Single-handle and double-handle Moen faucets use different internal components. A single-lever cartridge or mechanism will not fit a two-handle valve, and the reverse is also true. Count the handles on your faucet first. If you are unsure of your layout, Two-Handle Kitchen Faucets: Layout, Holes and Upkeep explains the differences.
Good picks for this: Moen Faucet Repair Kit 93980, Moen 1224 Replacement Faucet Cartridge Kit
Mounting Hardware and Sink Deck Fit
Mounting hardware depends on the number of holes in your sink deck and the thickness of the countertop. Measure the existing fixing plate and nut before ordering. A kit that does not match your deck can leave the faucet unstable even after installation.
Good picks for this: Moen Kitchen Faucet Parts Mounting Kit 113173, Mounting Kit for Moen Kitchen Faucet Parts 113173
Finish Matching
If you replace a visible component such as the spray head, finish matters. Moen lists specific finishes, and a mismatched sprayer can look obviously out of place on an otherwise good faucet. Check the finish code on the original part before you choose a replacement.
Good picks for this: Moen Arbor Classic Stainless Pulldown Spray Head 131380CSL
Durability and Parts Quality
Genuine manufacturer parts are generally a safer bet than unbranded substitutes, especially for cartridges and spray heads that carry water pressure every day. Owners frequently report that generic parts wear faster or fail to seat properly. Prioritize products that name the manufacturer part number clearly.
Good picks for this: Moen Arbor Classic Stainless Pulldown Spray Head 131380CSL, Moen Faucet Repair Kit 93980
Repair Versus Replacement
Not every problem is worth a part. If the faucet is old, the body is corroded or several components are failing at once, a full replacement may be the better long-term choice. Our guide on Replace Kitchen Faucet Cartridge: Step-by-Step Repair Guide walks through the repair route so you can decide.
Good picks for this: Moen 1224 Replacement Faucet Cartridge Kit, Mounting Kit for Moen Kitchen Faucet Parts 113173
FAQ
Can I fix a Moen kitchen faucet myself?
Most common repairs, such as replacing a cartridge, a spray head or mounting hardware, are within reach of a careful homeowner with basic tools. Always shut off the water supply first. If you are uncomfortable working under the sink or the faucet involves gas or electrical components, consult a licensed plumber.
How do I know which Moen cartridge I need?
Remove the old cartridge and note the markings on its body. Moen cartridges are identified by model or part numbers. Matching the old part to the listing photo and specifications is the most reliable method.
Why does my Moen faucet drip after I turn it off?
A continuous drip usually means a worn cartridge, a damaged valve seat or a faulty O-ring. Replacing the cartridge is the most common fix for single-handle and double-handle faucets alike.
Will a mounting kit stop a leak?
No. Mounting kits secure the faucet to the sink deck and do not repair water-control components. If you have a leak at the spout or handle, you need a cartridge or mechanism instead.
Are replacement spray heads interchangeable across all Moen faucets?
No. Spray heads are model-specific. The Arbor-compatible head is designed for Arbor pulldown faucets, so confirm your model before ordering.
Should I turn off the water before repairs?
Yes. Close the shutoff valves under the sink and open the faucet to relieve remaining pressure before removing any component. This prevents water from spraying during disassembly.
When should I call a professional?
If the faucet involves damaged plumbing, corroded supply lines or repairs you cannot complete safely, a licensed plumber should handle the work. Consult a professional before attempting any repair that involves cutting pipe or working near electrical fixtures.
Conclusion
For most single-handle leaks, the Moen Faucet Repair Kit 93980 is the strongest starting point. Loose faucets call for a mounting kit, and the Moen Kitchen Faucet Parts Mounting Kit 113173 is the more complete option. Failed pulldown sprayers are best solved with the Moen Arbor Classic Stainless Pulldown Spray Head 131380CSL, while double-handle owners should look at the Moen 1224 Replacement Faucet Cartridge Kit. The Mounting Kit for Moen Kitchen Faucet Parts 113173 suits shoppers who want a simple hardware fix on a tighter budget. Confirm your model before ordering, and the right part will usually solve the problem on the first try.
Sources
- Guidance on household water use, leaks and water-efficient fixtures (epa.gov)
- Consumer safety information on plumbing and home repair hazards (cpsc.gov)
- Information on residential water heating and fixture efficiency (energy.gov)
Related reading
About Miles Sinclair
Miles Sinclair is part of our editorial team and reviews and edits our kitchen faucets & sinks guides, checking product details against manufacturer specifications and owner feedback.
